Design and application of the control device of the cascading waste rejection valve of cigarette maker

Yuliang Li; Lifeng Fan; Shuai Yang; Yuehong Xiong; Jun Zhang

doi:10.1117/12.2660700

16 December 2022 Design and application of the control device of the cascading waste rejection valve of cigarette maker

Yuliang Li, Lifeng Fan, Shuai Yang, Yuehong Xiong, Jun Zhang

Proceedings Volume 12500, Fifth International Conference on Mechatronics and Computer Technology Engineering (MCTE 2022); 125002L (2022) https://doi.org/10.1117/12.2660700
Event: 5th International Conference on Mechatronics and Computer Technology Engineering (MCTE 2022), 2022, Chongqing, China

Abstract

In order to solve the problem that the defective cigarettes were mixed into the finished cigarettes under the single waste rejection valve mode of cigarette machine, the production speed was fast, the performance of the waste rejection valve was reduced, the drive module of the waste rejection valve was faulty, the signal circuit was broken, the peripheral pressure was too small, and so on. This paper provides a cigarette maker’s cascading among N waste rejection valves and its control device. After the first waste rejection valve acts, waste into the waste rejection valve after excluding effectiveness is monitored, when rejection fails, issue instructions in the next location continue to reject the waste, this makes all cigarette maker’s waste rejection valves can be correlated cascade control. The system failure rate is the product of the failure rates of all the scrap valves. After the online product verification, the results show that the failure rate of the cascade control is only 0.84%, which is significantly lower than that of the single waste rejection valve mode and has a significant promotion effect on quality assurance.

Citation Download Citation

Yuliang Li, Lifeng Fan, Shuai Yang, Yuehong Xiong, and Jun Zhang "Design and application of the control device of the cascading waste rejection valve of cigarette maker", Proc. SPIE 12500, Fifth International Conference on Mechatronics and Computer Technology Engineering (MCTE 2022), 125002L (16 December 2022); https://doi.org/10.1117/12.2660700

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
5 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Signal processing

Control systems

Calibration

Sensor calibration

Signal detection

Error analysis

Show All Keywords

Keywords/Phrases

Search In:

Publication Years