Dos and don’ts in mounting ZERODUR

Ralf Jedamzik; Hauke Esemann; Clemens Kunisch; Janina Krieg; Thomas Westerhoff

doi:10.1117/12.2675904

4 October 2023 Dos and don’ts in mounting ZERODUR

Ralf Jedamzik, Hauke Esemann, Clemens Kunisch, Janina Krieg, Thomas Westerhoff

Author Affiliations +

Proceedings Volume 12677, Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems IV; 126770K (2023) https://doi.org/10.1117/12.2675904
Event: SPIE Optical Engineering + Applications, 2023, San Diego, California, United States

Abstract

Because of its extremely low thermal expansion glass ceramic ZERODUR® is widely used as mirror substrate material in earth-bound and space-borne astronomy or as structural parts in integrated-circuit and flat panel display lithography (to name only some of its wide applications). In all its applications it needs to be mounted in some way to a support structure to enable its functionality. Common examples used in astronomical telescopes are epoxy bonding of invar pads to the ZERODUR® mirror blanks or epoxy-free mechanical clamping of ZERODUR® parts to support frames. The mounting should not influence the functionality by inducing thermo-mechanical deformation on the ZERODUR® part. But even more important the bonding procedure should prevent inducing high stresses to the mounting interface that potentially reduces the lifetime of the mount. The achievable strength of ZERODUR® strongly depends on its surface treatment. Generally, mechanical strengths of around 100 MPa are achieved on fine ground and acid etched ZERODUR® surfaces. When becoming interfaces, the reliability of the mount is not only influenced by the initial strength of these surfaces but also on the choice of the epoxy, the mounting material and even the geometrical configuration of the bonding. This paper gives a guideline on the “dos” and “don’ts” in mounting ZERODUR® supplemented by practical examples from literature.

Conference Presentation

(2023) Published by SPIE. Downloading of the abstract is permitted for personal use only.

Citation Download Citation

Ralf Jedamzik, Hauke Esemann, Clemens Kunisch, Janina Krieg, and Thomas Westerhoff "Dos and don’ts in mounting ZERODUR", Proc. SPIE 12677, Astronomical Optics: Design, Manufacture, and Test of Space and Ground Systems IV, 126770K (4 October 2023); https://doi.org/10.1117/12.2675904

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE