Presentation + Paper
7 June 2024 Self Q-switched Nd, Cr:YAG transparent ceramics
Ross A. Osborne, Alexander D. Drobshoff, Nerine J. Cherepy, Raymond J. Beach, Stephen A. Payne
Author Affiliations +
Abstract
Self Q-switched Nd, Cr:YAG laser rods were produced via additive manufacturing of transparent ceramics and lased. Two identical rods were produced and air annealed at different temperatures to vary the Cr4+ concentration. The pulse width varied based on the Cr4+ concentration from 10 to 18ns. The pulse repetition rate increased with the pumping intensity, up to 4 pulses within a 200μs pumping time. The pulse energy remained nearly constant at about 8mJ, with some variation attributed to thermal lensing.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Ross A. Osborne, Alexander D. Drobshoff, Nerine J. Cherepy, Raymond J. Beach, and Stephen A. Payne "Self Q-switched Nd, Cr:YAG transparent ceramics", Proc. SPIE 13029, Laser Technology for Defense and Security XIX, 1302905 (7 June 2024); https://doi.org/10.1117/12.3019086
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Chromium

Neodymium

Annealing

Absorption

Ceramics

Rod lasers

Q switched lasers

RELATED CONTENT

Energy scaling of passively Q switched lasers In the Mj...
Proceedings of SPIE (November 17 2017)
Development of a high energy, quasi three level Nd YVO4...
Proceedings of SPIE (December 09 2008)
Nd:Cr:GSGG, Will It Replace Nd:YAG?
Proceedings of SPIE (April 06 1987)
Stacked arrays as pumping modules for high power cw Nd...
Proceedings of SPIE (April 28 1995)

Back to Top