Presentation + Paper
7 June 2024 Single image spectroscopy using a grating spectrometer and a broadband IR laser source
Christopher A. Kendziora, Tyler J. Huffman
Author Affiliations +
Abstract
We present recent results from using a quantum cascade laser as a broadband infrared source for real-time spectroscopy. Using a Fabry-Perot quantum cascade laser (FP-QCL), we illuminate samples with broadband IR light from 8.2 μm to 10.2 μm. This laser source and its operating conditions (25°C and 500 ns pulses at 200 kHz repetition rate) were chosen to give broad spectral coverage and high power output (42.7 mW average power, pulsed operation). We utilized a simple grating spectrometer together with a high resolution (1280 x 1024 pixel) micro-bolometer focal plane array to capture each full spectrum in a single frame. Several samples were characterized using this apparatus in a transmission-style measurement and their real-time spectra were compared to their Fourier Transform Infrared (FTIR) spectra. The results show a good agreement between FTIR and the real-time grating spectrometer for several representative samples, including bandpass filters, and IR active materials such as polystyrene, polyester, and polypropylene. Finally, we show the real-time benefit of this approach by measuring a moving target foil on a rotating chopper wheel.
Conference Presentation
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Christopher A. Kendziora and Tyler J. Huffman "Single image spectroscopy using a grating spectrometer and a broadband IR laser source", Proc. SPIE 13056, Chemical, Biological, Radiological, Nuclear, and Explosives (CBRNE) Sensing XXV, 130560X (7 June 2024); https://doi.org/10.1117/12.3013896
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Spectroscopy

Quantum cascade lasers

FT-IR spectroscopy

Calibration

Infrared spectroscopy

Plastics

Pulsed laser operation

Back to Top