Paper
5 June 2024 Design and verification of self-adaptive control towing apparatus for ship model test
Yongshun Wu, Lei Huang, Yan Le, Dehai Li, Sujun Yang
Author Affiliations +
Proceedings Volume 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024); 1316306 (2024) https://doi.org/10.1117/12.3030465
Event: International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 2024, Xi'an, China
Abstract
According to International Towing Tank Conference (ITTC) corresponding guidelines and rules, ship model test is vital for the determination on overall performance of the ship. In order to study ship speed performance, it is necessary to accurately determine its resistance in model scale. And during the test, an appropriate towing installation is very important because of its effecting on the heave and longitudinal angle of ship mode, which is the main factor of the resistance. Combined with the latest test equipment and control technologies, a self-adaptive control towing device design, resistance and posture measurement and control principle were studied, a towing system suitable for high-speed boat resistance test was developed, and the advantages of the system were analyzed. Based on this, and a standard planning craft model test is applied, which can verify the validity of installation.
(2024) Published by SPIE. Downloading of the abstract is permitted for personal use only.
Yongshun Wu, Lei Huang, Yan Le, Dehai Li, and Sujun Yang "Design and verification of self-adaptive control towing apparatus for ship model test", Proc. SPIE 13163, Fourth International Conference on Mechanical, Electronics, and Electrical and Automation Control (METMS 2024), 1316306 (5 June 2024); https://doi.org/10.1117/12.3030465
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Resistance

Motion models

Sensors

Control systems

Instrument modeling

Data modeling

Design

Back to Top