Paper
12 October 1996 Dynamic analysis of a one-meter primary mirror for a space telescope
Hyun Kyu Kim, Woo Gun Kwon, Je Sun Gu
Author Affiliations +
Abstract
A dynamic analysis of a flexure support system for a one- meter primary mirror in a space telescope is presented. It is assumed that the primary mirror is held by a three-point flexure support at the back surface. The design study is to be conducted with three different power spectral density functions (PSDF) and four different sized support systems. Mechanical responses of the mirror to each PSDF are to be examined. Using the finite-element analysis program, MSC/NASTRAN, the maximum root-mean-square values of the bending stress and the axial stress in the flexure system due to the launch loads are calculated. As a result, the stiffness and the strength of the flexure in the vertical (optical axis) and tangential directions to accommodate the launch loads are discussed.
© (1996) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hyun Kyu Kim, Woo Gun Kwon, and Je Sun Gu "Dynamic analysis of a one-meter primary mirror for a space telescope", Proc. SPIE 2807, Space Telescopes and Instruments IV, (12 October 1996); https://doi.org/10.1117/12.255111
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Space telescopes

Space mirrors

Safety

Finite element methods

Cryogenics

Computing systems

RELATED CONTENT

Finite element analyses of CCAT preliminary design
Proceedings of SPIE (July 22 2014)
Design Of A Support System For The Primary Mirror Of...
Proceedings of SPIE (July 18 1986)
OWL opto-mechanics: phase A
Proceedings of SPIE (September 28 2004)

Back to Top