Paper
30 December 1981 Glancing Incidence Optics For High Power Lasers
P. B. Mumola, D. C. Jordan
Author Affiliations +
Proceedings Volume 0288, Los Alamos Conf on Optics '81; (1981) https://doi.org/10.1117/12.932023
Event: Los Alamos Conference on Optics, 1981, Los Alamos, United States
Abstract
The design of optical systems for high power lasers is ultimately constrained by the damage of optical surfaces due to the laser fluence. In CO2 laser fusion systems, the damage to copper mirrors in vacuum is attributed to melting produced by the absorbed laser energy. The Fresnel equations indicate that the use of metal mirrors at high angles of incidence (75-85 degrees from normal) results in reduced absorption of properly polarized light. This should lead to a commensurate improvement in damage resistance. Other benefits to be accrued include improved transmitted wavefront quality (for a given mirror figure error) and, of course, lower transmission losses. Application of glancing incidence concepts to advanced CO2 laser fusion systems will be described with emphasis on beam transfer and focusing mirrors. Applications to other systems at shorter wavelengths typical of the rare gas halide lasers will also be discussed.
© (1981) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. B. Mumola and D. C. Jordan "Glancing Incidence Optics For High Power Lasers", Proc. SPIE 0288, Los Alamos Conf on Optics '81, (30 December 1981); https://doi.org/10.1117/12.932023
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Reflectivity

Copper

High power lasers

Wavefronts

Laser systems engineering

Tolerancing

RELATED CONTENT

The SMS3D photovoltaic concentrator
Proceedings of SPIE (September 09 2008)
Beam quality of a high power CO2 laser with an...
Proceedings of SPIE (January 20 1999)
The optomechanical design of Amon-Ra instrument
Proceedings of SPIE (February 10 2005)

Back to Top