Paper
29 June 1998 Improved positive surface modification resist process for 193-nm lithography
Masayuki Endo, Takahiro Matsuo, Shigeyasu Mori, Taku Morisawa, Koichi Kuhara, Masaru Sasago, Masamitsu Shirai, Masahiro Tsunooka
Author Affiliations +
Abstract
With increase in density of semiconductor devices, 193 nm lithography is promising to attain smaller feature size patterns. Surface imaging process is useful for this lithography in terms of large depth of focus and prevention from substrate reflection. As the surface imaging process, so far we developed positive surface modification resist process using CVD for various device patterns' fabrication. To solve the issues of selective polysiloxane layer formation and sensitivity, we have improved this positive surface modification resist process using a new polymer, poly(cyclohexyl p-styrenesulfonate-co-methyl methacrylate), and a new photobase generator, O-phenylacetyl acetonaphthone oxime. 0.15 micrometers pattern was successfully fabricated using the new process with improved sensitivity of 80 mJ/cm2.
© (1998) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masayuki Endo, Takahiro Matsuo, Shigeyasu Mori, Taku Morisawa, Koichi Kuhara, Masaru Sasago, Masamitsu Shirai, and Masahiro Tsunooka "Improved positive surface modification resist process for 193-nm lithography", Proc. SPIE 3333, Advances in Resist Technology and Processing XV, (29 June 1998); https://doi.org/10.1117/12.312439
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photoresist processing

Polymers

Chemical vapor deposition

Image processing

Lithography

Photolysis

193nm lithography

Back to Top