Calibration of x-ray digital tomosynthesis system including the compensation for image distortion

Young Jun Roh; Kuk Won Koh; Hyungsuck Cho; Jin-Young Kim; Hyung Cheol Kim; Jong-Eun Byun

doi:10.1117/12.326966

6 October 1998 Calibration of x-ray digital tomosynthesis system including the compensation for image distortion

Young Jun Roh, Kuk Won Koh, Hyungsuck Cho, Jin-Young Kim, Hyung Cheol Kim, Jong-Eun Byun

Author Affiliations +

Proceedings Volume 3521, Machine Vision Systems for Inspection and Metrology VII; (1998) https://doi.org/10.1117/12.326966
Event: Photonics East (ISAM, VVDC, IEMB), 1998, Boston, MA, United States

Abstract

X-ray laminography and DT (digital tomosynthesis) are promising technologies to form a cross-section image of 3D objects and can be a good solution for inspection interior defects of industrial products. It has been known that digital tomosynthesis method has several advantages over laminography method in that it can overcome the problems such as blurring effect or artifact. The DT system consists of a scanning x-ray tube, an image intensifier as an x-ray image detector, and a CCD camera. To acquire an x-ray image of an arbitrary plane of objects, a set of images (8 images or more) should be synthesized by averaging or minimally calculating point by point. The images, however are distorted according to the configurations of the image intensifier and the x-ray source position. To get a clear and accurate synthesized image, the corresponding points in the distorted images should be accurately determined, and therefore, precise calibration of the DT system is needed to map the corresponding points correctly. In this work, a series of calibration methods for the DT system are presented including the correction of the center offset between the x-ray and the image intensifer, the x-ray steering calibration, and the correction of the distortion of the image. The calibration models are implemented to the DT system and the experiment results are presented and discussed in detail.

Citation Download Citation

Young Jun Roh, Kuk Won Koh, Hyungsuck Cho, Jin-Young Kim, Hyung Cheol Kim, and Jong-Eun Byun "Calibration of x-ray digital tomosynthesis system including the compensation for image distortion", Proc. SPIE 3521, Machine Vision Systems for Inspection and Metrology VII, (6 October 1998); https://doi.org/10.1117/12.326966

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE