Paper
8 September 1999 Measuring the high-power CO2 laser space parameter by use of computer processing organic-glass burning mark
Jinhe Liu, Shujuan Gao, Wanqian Hu, Xianhong Hu
Author Affiliations +
Proceedings Volume 3862, 1999 International Conference on Industrial Lasers; (1999) https://doi.org/10.1117/12.361184
Event: International Symposium on Industrial Lasers, 1999, Wuhan, China
Abstract
In this research, the method of computer processing organic- glass burning-mark is used to measure the high power CO2 laser mode and space parameters (beam diameter, beam waist diameter, beam quality factor and divergence angle). The graphs of intensity distribution in cross-section of beam and its magnitude contours are given out. The results indicate that the output mode of some a import 5 kW transverse CO2 laser is non-symmetric Laguerre-Gauss beam which is mainly consisted of TEM02, TEM20 and TEM03, whose center region intensity is less than adjacency intensity, the size of the center bright spot is bigger, the distribution of power density is relatively uniform.
© (1999) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinhe Liu, Shujuan Gao, Wanqian Hu, and Xianhong Hu "Measuring the high-power CO2 laser space parameter by use of computer processing organic-glass burning mark", Proc. SPIE 3862, 1999 International Conference on Industrial Lasers, (8 September 1999); https://doi.org/10.1117/12.361184
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
High power lasers

Carbon dioxide lasers

Error analysis

Transmission electron microscopy

Combustion

Laser beam propagation

3D metrology

Back to Top