Coaxial process control during laser beam welding of tailored blanks

Christian Kratzsch; Peter Abels; Stefan Kaierle; Reinhart Poprawe; Wolfgang Schulz

doi:10.1117/12.377055

7 February 2000 Coaxial process control during laser beam welding of tailored blanks

Christian Kratzsch, Peter Abels, Stefan Kaierle, Reinhart Poprawe, Wolfgang Schulz

Proceedings Volume 3888, High-Power Lasers in Manufacturing; (2000) https://doi.org/10.1117/12.377055
Event: Advanced High-Power Lasers and Applications, 1999, Osaka, Japan

Abstract

Production of laser beam welded tailored blanks requires both, high quality processing as well as a quality assurance by reliable monitoring systems for each welded part. Actual quality monitoring systems for tailored blank applications make use of different sensors for seam tracking, seam shape detection and process control. The suitable process diagnostic device is a plasma sensor which detects the optical emission of the weld plasma. Experimental evidence show that the reliability of the seam quality prediction can significantly be improved by using a camera system with a two-dimensional spatial resolution instead of an integrating plasma detector. The improvement is achieved by exploiting the information provided by the spatially distributed intensity of the plasma emission. In particular, by coaxial arrangement of the camera with respect to the laser beam axis, the direction of observation allows to detect significant process characteristics. Based upon these results a coaxial process control system was developed that can be adapted for different laser materials processing applications like welding, cutting and surface treatment. The system consists of a high speed camera mounted directly at the welding head. The optical path of the camera goes coaxial with the laser beam path through the focusing optics. The camera images taken from the process are analyzed using image processing algorithms. The algorithms are chosen depending on the type of application to be monitored. In the case of welding tailored blanks the system can monitor a full penetration of the workpiece, deviations from the desired welding path, seam width, stability of the capillary shape and defects of the seam caused by spatter and ejection of molten material. The camera system offers the ability to perform simultaneously different quality monitoring tasks like determination of seam and capillary shape, seam tracking and process control. Thus the number of sensors required for quality monitoring is reduced to one single system.

Citation Download Citation

Christian Kratzsch, Peter Abels, Stefan Kaierle, Reinhart Poprawe, and Wolfgang Schulz "Coaxial process control during laser beam welding of tailored blanks", Proc. SPIE 3888, High-Power Lasers in Manufacturing, (7 February 2000); https://doi.org/10.1117/12.377055

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available