Characterization of micromanipulators for CO2 laser surgery in head and neck: comparison of reflective and refractive optical systems

Kenneth K. H. Chao; Eric Cheung; William B. Armstrong; Brian Jet-Fei Wong M.D.

doi:10.1117/12.386237

17 May 2000 Characterization of micromanipulators for CO₂ laser surgery in head and neck: comparison of reflective and refractive optical systems

Kenneth K. H. Chao, Eric Cheung, William B. Armstrong, Brian Jet-Fei Wong M.D.

Author Affiliations +

Proceedings Volume 3907, Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems X; (2000) https://doi.org/10.1117/12.386237
Event: BiOS 2000 The International Symposium on Biomedical Optics, 2000, San Jose, CA, United States

Abstract

Laser micromanipulators deliver laser energy to difficult to access regions within the head and neck allowing surgeons to perform high precision microsurgical procedures. In this study, the laser spot sizes (as a function of power) produced by a two micromanipulators of different optical design were compared. A CO₂ laser and operating microscope (400 mm focal length) was coupled to either a reflective (Cassegrain- like) (Unimax 2000, Reliant Technologies, Inc., Foster City, CA) or refractive micromanipulator (Microslad 719, Sharplan Lasers Inc. Allendale, NJ). The laser spot size was determined by measuring the region of ablation following laser irradiation of dry tongue blades, exposed photopaper, and agar gel using optical micrometry. Laser power was varied from 0.5 to 20 W for pulse durations of 0.1 and 0.5 seconds. A logarithmic relationship between spot size (diameter) and laser power on wood and photopaper was observed for both devices. In agar samples a discontinuity in spot size was observed at 9 W due to the formation of a large ablation crater on the surface of the agar. For a given laser power, the micromanipulator with reflective optics demonstrated overall smaller spot sizes and lower incremental change in spots size with increasing power. These results suggest the reflective micromanipulator tested in this study produced a smaller spot size at all powers tested, and with increasing power the spot size increased more slowly than with the conventional refractive optical device tested.

Citation Download Citation

Kenneth K. H. Chao, Eric Cheung, William B. Armstrong, and Brian Jet-Fei Wong M.D. "Characterization of micromanipulators for CO₂ laser surgery in head and neck: comparison of reflective and refractive optical systems", Proc. SPIE 3907, Lasers in Surgery: Advanced Characterization, Therapeutics, and Systems X, (17 May 2000); https://doi.org/10.1117/12.386237

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE