Paper
21 July 2000 Experimental validation of a thermal model used to predict the image placement error of a scanned EUVL reticle
Steven E. Gianoulakis, Marcus J. Craig, Avijit K. Ray-Chaudhuri
Author Affiliations +
Abstract
Lithographic masks must maintain dimensional stability during exposure in a lithographic tool to minimize subsequent overlay errors. In extreme ultraviolet lithography (EUVL), multilayer coatings are deposited on a mask substrate to make the mask surface reflective at EUV wavelengths. About 40% of the incident EUV light is absorbed by the multilayer coating which leads to a temperature rise. The choice of mask substrate material and absorber affects the magnitude of thermal distortion. Finite element modeling has been used to investigate potential mask materials and to explore the efficiency of various thermal management strategies. An experimental program was conducted to validate the thermal models used to predict the performance of EUV reticles. The experiments closely resembled actual conditions expected within the EUV tool. A reticle instrumented with temperature sensors was mounted on a scanning stage with an electrostatic chuck. An actively cooled isolation plate was mounted in front of the reticle for thermal management. Experimental power levels at the reticle corresponding to production throughput levels were utilized in the experiments. Both silicon and low expansion glass reticles were tested. Temperatures were measured a several locations on the reticle and tracked over time as the illuminated reticle was scanned. The experimental results coupled with the predictive modeling capability validates that the assertion that the use of a low expansion glass will satisfy image placement error requirements down to the 30 nm lithographic node.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven E. Gianoulakis, Marcus J. Craig, and Avijit K. Ray-Chaudhuri "Experimental validation of a thermal model used to predict the image placement error of a scanned EUVL reticle", Proc. SPIE 3997, Emerging Lithographic Technologies IV, (21 July 2000); https://doi.org/10.1117/12.390035
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Reticles

Semiconducting wafers

Thermal modeling

Extreme ultraviolet lithography

Silicon

Data modeling

Calibration

RELATED CONTENT

Evaluation of methods to improve EUV OPC model accuracy
Proceedings of SPIE (April 01 2013)
Vote taking for EUV lithography a radical approach to...
Proceedings of SPIE (March 24 2017)
Predictive modeling of EUV lithography the role of mask,...
Proceedings of SPIE (October 04 2011)
Accurate models for EUV lithography
Proceedings of SPIE (September 23 2009)

Back to Top