Paper
2 November 2000 High-uniformity collimator for x-ray proximity lithography
Author Affiliations +
Abstract
An x-ray optic suitable for use in x-ray proximity lithography is described. It employs multiple flat mirror facets arranged at grazing incidence, each of which creates an optically independent channel that covers the entire target. The facets are arranged so that many channels can simultaneously illuminate the target, thereby achieving high flux at the target with high uniformity. We report laboratory testing that shows uniformity better than +/- 0.4% across 40 mm at 1 keV.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Webster C. Cash "High-uniformity collimator for x-ray proximity lithography", Proc. SPIE 4144, Advances in Laboratory-based X-Ray Sources and Optics, (2 November 2000); https://doi.org/10.1117/12.405897
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Collimators

Mirrors

X-rays

X-ray lithography

Lithography

X-ray sources

RELATED CONTENT

Microfocusing with grazing incidence x-ray micromirrors
Proceedings of SPIE (November 02 2000)
Innovative x-ray optics for laboratory
Proceedings of SPIE (October 23 2002)
Review of x-ray collimators for x-ray proximity lithography
Proceedings of SPIE (November 23 1999)
High-uniformity collimator for x-ray proximity lithography
Proceedings of SPIE (November 23 1999)

Back to Top