Paper
25 August 2000 Patterning of diamond films by RIE and its MEMS applications
Guifu Ding, Jinyuan Yao, Aibin Yu, Xiaolin Zhao, Li Wang, Tianhui Shen
Author Affiliations +
Proceedings Volume 4174, Micromachining and Microfabrication Process Technology VI; (2000) https://doi.org/10.1117/12.396465
Event: Micromachining and Microfabrication, 2000, Santa Clara, CA, United States
Abstract
CVD diamond film is an attractive potential material for microelectronics and MEMS application, but patterning of diamond is one of the main difficulties hindering diamond electronics. In this paper, we studied the RIE process for precise patterning of diamond films. Ni/Cr, Cu/Cu or NiTi films were used as maskants, oxygen as reactive gas. The etching results showed that the NiTi film has high etching selectivity when used as mask for diamond etching and its is very convenient to be patterned by the special developed chemical etchant. Using O2 as main etching gas, the RIE can etch the diamond film effectively. The process parameters such as RF power, vacuum pressure have marked influence on the etching rate and the patterning of diamond film has been defined. Combined with sacrifice layer process and electroplating through mask technique, diamond micro hinge has been fabricated on silicon wafer.
© (2000) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guifu Ding, Jinyuan Yao, Aibin Yu, Xiaolin Zhao, Li Wang, and Tianhui Shen "Patterning of diamond films by RIE and its MEMS applications", Proc. SPIE 4174, Micromachining and Microfabrication Process Technology VI, (25 August 2000); https://doi.org/10.1117/12.396465
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Diamond patterning

Etching

Diamond

Reactive ion etching

Microelectromechanical systems

Photomasks

Chemical vapor deposition

RELATED CONTENT


Back to Top