Paper
14 June 2001 Piezoelectric energy harvesting for bio-MEMS applications
Author Affiliations +
Abstract
A simple design study is conducted to investigate the feasibility of using piezoelectric materials in a power supply for an in vivo MEMS application. An analysis is presented comparing the 33- and 31- modes of operation for a piezoelectric generator. It will be shown that a transversely loaded membrane (31-mode) or thin plate element has a mechanical advantage in converting applied pressure to working stress for piezoelectric conversion. A design study is carried out using a square PZT-5A membrane driven by a fluctuating pressure source (blood pressure). The expected power output from a 1cm 2 plate is calculated for a range of thicknesses, along with the power output from a 9micrometers thick plate for a range of areas. Additionally, the feasibility of providing intermittent power instead of continuous power or increased excitation frequency will be shown. The primary conclusion of this analysis is that an in vivo piezoelectric generator on a size scale of 1cm 2may be able to power a MEMS application in the (mu) W power range continuously, and up to the (mu) W range intermittently.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael J. Ramsay and William W. Clark "Piezoelectric energy harvesting for bio-MEMS applications", Proc. SPIE 4332, Smart Structures and Materials 2001: Industrial and Commercial Applications of Smart Structures Technologies, (14 June 2001); https://doi.org/10.1117/12.429684
Lens.org Logo
CITATIONS
Cited by 134 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Microelectromechanical systems

In vivo imaging

Power supplies

Blood pressure

Energy harvesting

Transducers

Ferroelectric materials

Back to Top