Application of advanced 100-kV EB writer EB-X3 for 100-nm node x-ray mask fabrication

Hiroshi Watanabe; Yoshinori Nakayama; Shinji Tsuboi; Mizunori Ezaki; Hajime Aoyama; Yasuji Matsui; Tetsuo Morosawa; Masatoshi Oda

doi:10.1117/12.436670

20 August 2001 Application of advanced 100-kV EB writer EB-X3 for 100-nm node x-ray mask fabrication

Hiroshi Watanabe, Yoshinori Nakayama, Shinji Tsuboi, Mizunori Ezaki, Hajime Aoyama, Yasuji Matsui, Tetsuo Morosawa, Masatoshi Oda

Author Affiliations +

Proceedings Volume 4343, Emerging Lithographic Technologies V; (2001) https://doi.org/10.1117/12.436670
Event: 26th Annual International Symposium on Microlithography, 2001, Santa Clara, CA, United States

Abstract

Most important issues in a precise X-ray mask fabrication are the mask materials and EB writing to achieve good accuracy in critical dimension (CD) control and image placement (IP). However, 1-to-1 X-ray mask is required severe accuracy in comparison with photo reticles. The following discussions focus on how to realize the precise IP accuracy. We installed and evaluated 100-kV electron-beam (EB) mask writer (EB-X3), and developed the writing process on a thin membrane. Key factors in accurate EB mask writing include not only EB positioning accuracy but also mask distortions caused by mask holding and the temperature change of the mask and a mask holder. This paper presents mask distortion characteristics due to the holding, temperature change, and then, good results of mask accuracy of 4-Gb dynamic random access memory (DRAM) test patterns (gate and contact layers) and 90 nm SRAM test patterns. In addition, we employed the advanced PAT method with 4-multi-pass writing that adequately compensates the process-induced mask distortion and the beam drift. These improvements resulted in IP accuracy of better than 10 nm (3(sigma) ), 100 nm CD uniformity within 8 nm (mean shift +/- 3(sigma) ) and the overlay accuracy within 10 nm for 4-Gb gate and contact layers with a 24 mm x 24 mm area on the X-ray membrane mask. These results demonstrate that we can actually fabricate precise X-ray membrane masks that meet our final target of IP accuracy corresponding to the 100 nm technology node.

Citation Download Citation

Hiroshi Watanabe, Yoshinori Nakayama, Shinji Tsuboi, Mizunori Ezaki, Hajime Aoyama, Yasuji Matsui, Tetsuo Morosawa, and Masatoshi Oda "Application of advanced 100-kV EB writer EB-X3 for 100-nm node x-ray mask fabrication", Proc. SPIE 4343, Emerging Lithographic Technologies V, (20 August 2001); https://doi.org/10.1117/12.436670

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE