Paper
22 October 2001 Traceable measurements for tape benches made easy
Author Affiliations +
Proceedings Volume 4401, Recent Developments in Traceable Dimensional Measurements; (2001) https://doi.org/10.1117/12.445610
Event: Lasers in Metrology and Art Conservation, 2001, Munich, Germany
Abstract
Laser interferometers provide an easy path for traceable measurements as most commercial instruments are inherently accurate to better than 10-7. The main problem with using these interferometers over an extended path can be the alignment requirements which can only be met with a precision rail system. Tape benches are typically 50 m (or more) long and are easily affected by building movement, requiring frequent re-alignment. An interferometer with an expanded measurement beam has significantly reduced alignment requirements and one with a beam diameter of 45 mm was used by the author to measure survey pillars. This had an alignment tolerance of +/- 10 mm allowing the use of a simple stretched wire rail system. This paper describes a simple adaptation that can be made to a commercial interferometer to expand the measurement beam without interfering with its normal operation.
© (2001) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nicholas Brown "Traceable measurements for tape benches made easy", Proc. SPIE 4401, Recent Developments in Traceable Dimensional Measurements, (22 October 2001); https://doi.org/10.1117/12.445610
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Interferometers

Retroreflectors

Mirrors

Reflectors

Beam splitters

Optical testing

Distance measurement

Back to Top