Paper
13 March 2003 Active vibration isolation using decentralized velocity feedback control
Michael J. Brennan, Stephen J. Elliott, X. Huang
Author Affiliations +
Abstract
Isolating a piece of delicate equipment from the vibration of a base structure is of practical importance in a number of engineering fields. Examples are the isolation of instrument boxes in aeroplane and the isolation of telescopes and antennas in satellites. In the majority of cases, the base is flexible and vibrates with an upredictable waveform which has a broadband spectrum. The active isolation of a vibration-sensitive equipment structure from a vibrating base is studied in this paper. Passive anti-vibration mounts are widely used to support the equipment and protect it from severe base vibration. However, conventional passive mounts suffer from an inherent trade-off between high frequency isolation and amplification of vibration at the fundamental mounted resonance frequency. General the best isolation performance is achieved by using an active system in combination with a passive mount, where the fundamental resonance can be actively controlled without reducing the high frequency performance.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael J. Brennan, Stephen J. Elliott, and X. Huang "Active vibration isolation using decentralized velocity feedback control", Proc. SPIE 4763, European Workshop on Smart Structures in Engineering and Technology, (13 March 2003); https://doi.org/10.1117/12.508681
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Actuators

Feedback control

Vibration isolation

Control systems

Electromagnetism

Active isolation

Optical isolators

RELATED CONTENT


Back to Top