Paper
22 August 2002 Fiber dispersion considerations with gigabit-speed optical ethernet access
Lisa Peng
Author Affiliations +
Proceedings Volume 4908, Metro and Access Networks II; (2002) https://doi.org/10.1117/12.480715
Event: Asia-Pacific Optical and Wireless Communications 2002, 2002, Shanghai, China
Abstract
IEEE's 802.3ah (Ethernet in the First Mile task force) is concentrating on a standard aimed at making optical access affordable and ubiquitous. Subscribers will be able to get 1 Gb/s bi- directional capacity to the central offices. This Gigabit passive optical network (PON) system implies the use of low-cost opto-electronics and standard single-mode fibers. Historically, dispersion of single-mode fibers in these systems has not been an issue due to the relatively low data rates and limited distance. However, for optical Ethernet access, distances up to 20 km and extended temperature ranges are being considered. Therefore, there are now system limitations due to various dispersion penalties. This paper explores the fundamental issues of dispersion and its impact on the access network from a statistical point of view.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lisa Peng "Fiber dispersion considerations with gigabit-speed optical ethernet access", Proc. SPIE 4908, Metro and Access Networks II, (22 August 2002); https://doi.org/10.1117/12.480715
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Temperature metrology

Single mode fibers

Fiber lasers

Failure analysis

Standards development

Statistical analysis

Local area networks

RELATED CONTENT


Back to Top