Paper
26 July 2004 Smart fabric adaptive stiffness for active vibration absorbers
Author Affiliations +
Abstract
Unconstrained magnetorheological-elastomers (MRE) experience a stiffness increase and elastomeric deformation in response to an applied magnetic field. An MRE consists of ferromagnetic particles dispersed in a host elastomer matrix. This study considers whether the stiffness change of MRE springs is due to magnetic particle-to-particle interactions or to elastomer deformation. If the stiffening is attributable to magnetic particle interaction, then it should occur even in the absence of the elastomer. To test this hypothesis, a smart fabric consisting of low-carbon steel thread in one direction and nonmagnetic thread in the other was created. Two extension springs were placed in parallel with this smart fabric, and placed in between two iron masses. An electromagnet coil wound about one of the masses provided the source of magnetic field across the smart fabric. The frequency response of the device was measured when the coil was driven by a DC current, at 0.5 Amp increments, from 0 to 4. The device exhibited a 33% increase in stiffness at 4 Amps compared to the stiffness at 0 Amps. While this shift is not as large as shifts observed in MREs, the design was not optimized for iron content, and only had a 0.6% iron content.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anne-Marie Albanese and Kenneth A. Cunefare "Smart fabric adaptive stiffness for active vibration absorbers", Proc. SPIE 5383, Smart Structures and Materials 2004: Modeling, Signal Processing, and Control, (26 July 2004); https://doi.org/10.1117/12.539885
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Magnetism

Iron

Particles

Control systems

Amplifiers

Statistical analysis

Vibration control

Back to Top