OLC: a signal conditioning and calibration technique for magnetoelastic sensors

Romualdo Sorrentino

doi:10.1117/12.539547

27 July 2004 OLC: a signal conditioning and calibration technique for magnetoelastic sensors

Romualdo Sorrentino

Proceedings Volume 5384, Smart Structures and Materials 2004: Smart Sensor Technology and Measurement Systems; (2004) https://doi.org/10.1117/12.539547
Event: Smart Structures and Materials, 2004, San Diego, CA, United States

Abstract

Magnetoelastic materials used as sensors are obtaining an increasing interest in the last few years. The magnetoelastic wave resonance frequency is the sensitive parameter generally measured to obtain key information on the magnetoelastic material; nevertheless, it was shown that also the amplitude of the magnetoelastic wave, stimulated at a frequency close to the sensor core resonance frequency (pseudo-resonance), is very sensitive to measure magnetic fields. By basing on that characteristic, both parameters, "pseudo-resonance" amplitude and resonance frequency, could be used as the "sensitive parameter" in no-contact vibration sensors or stress, flux and magnetic field sensors. In a previous paper the authors proposed a signal condition technique for magnetoelastic elements, and used it for no-contact vibration and displacement measurements. The measurements, even though had a good linearity and low distortion, comparable to that of traditional devices (LVDT or accelerometer), had a too poor repeatability, due to a time-varying behavior of the sensor magnetoelastic core. This paper proposes an On-Line self-Calibration technique for magnetoelastic sensors, OLC, that solves the repeatability problem by improving the sensor accuracy of about one order of magnitude. No external reference sensor is used, but just an easy to obtain reference stimulus. A tuning procedure is then shown, able to put the sensor into a repeatable, time-invariant status, by acting on a static polarization magnetic field. Finally, the proposed technique is applied for no-contact vibration measurements. Results are presented, comparing them with the case of no OLC applied.

Citation Download Citation

Romualdo Sorrentino "OLC: a signal conditioning and calibration technique for magnetoelastic sensors", Proc. SPIE 5384, Smart Structures and Materials 2004: Smart Sensor Technology and Measurement Systems, (27 July 2004); https://doi.org/10.1117/12.539547

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available