Paper
29 September 2004 Single-sided CZT strip detectors
Author Affiliations +
Abstract
We report progress in the study of thick CZT strip detectors for 3-d imaging and spectroscopy and discuss two approaches to device design. We present the spectroscopic, imaging, detection efficiency and response uniformity performance of prototype devices. Unlike double-sided strip detectors, these devices feature both row and column contacts implemented on the anode surface. This electron-only approach circumvents problems associated with poor hole transport in CZT that normally limit the thickness and energy range of double-sided strip detectors. These devices can achieve similar performance to pixel detectors. The work includes laboratory and simulation studies aimed at developing compact, efficient, detector modules for 0.05 to 1 MeV gamma radiation measurements. The low channel count strip detector approach can significantly reduce the complexity and power requirements of the readout electronics. This is particularly important in space-based coded aperture or Compton telescope instruments requiring large area, large volume detector arrays. Such arrays will be required for NASA's Black Hole Finder Probe (BHFP) and Advanced Compton Telescope (ACT).
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
John R. Macri, Burcin Donmez, Mark Widholm, Louis-Andre Hamel, Manuel Julien, Tomohiko Narita, James Macri Ryan, and Mark L. McConnell "Single-sided CZT strip detectors", Proc. SPIE 5501, High-Energy Detectors in Astronomy, (29 September 2004); https://doi.org/10.1117/12.551958
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Prototyping

Signal detection

Electrodes

Electronics

Imaging spectroscopy

Ceramics

Back to Top