Paper
18 June 2007 Simulation of the detectors response of an autocollimator
Author Affiliations +
Abstract
A detection of the lateral position of a test pattern imaged onto a position sensitive detector is quite commonly used in a variety of different measurement applications. In the case of an electronic autocollimator, the position of the image of a reticle is determined to measure small angle changes of a tilted surface. In many cases CCD matrix or CCD line detectors are used as position sensing devices. Two different procedures for the detection of the position of the test pattern are compared taking into account modulations of the obtained image signal, caused by diffraction. Differences between the detection of the arithmetic mean value and the geometrical mean value of the intensity will be analyzed. The influence of different fill factors of the detector elements is calculated. To avoid unwanted modulations of the signal a suitable method or algorithm for the detection of the position as well as an optimized layout of the reticle has to be chosen. Binary and phase shifting reticle designs will be compared. It is shown that an optimized layout is able to largely compensate modulations while the image is laterally shifted in the plane of the detector. Due to a step by step description of the image formation and signal analysis the example given will be also of practical use.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Gerald Fütterer "Simulation of the detectors response of an autocollimator", Proc. SPIE 6617, Modeling Aspects in Optical Metrology, 661703 (18 June 2007); https://doi.org/10.1117/12.725428
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Autocollimators

Reticles

Sensors

Charge-coupled devices

Modulation

Point spread functions

CCD image sensors

RELATED CONTENT

The NGS Pyramid wavefront sensor for ERIS
Proceedings of SPIE (July 21 2014)
Development of large area CCD based x ray detector for...
Proceedings of SPIE (October 06 1999)
Lenslet-array-based Stokes vector imagery
Proceedings of SPIE (July 15 2004)
Modeling The Interpretability Of Electro-Optical Imagery
Proceedings of SPIE (February 01 1990)
Study of the diffraction by the corner cube
Proceedings of SPIE (September 27 2008)

Back to Top