Paper
10 September 2007 Simple and cost effective wavelength setting and monitoring method using software-based wavelength estimation for WDM pluggable optical transceiver
Author Affiliations +
Abstract
In this paper, we propose a wavelength locker free, simple and cost effective wavelength setting and monitoring method that estimates wavelength on a software basis. This method uses preliminarily measured wavelengths at selected sets of drive current and device temperature, which are stored in the memory of the transceiver module. We then determine the relationship among the wavelength, the drive current, and the device temperature as a linear function. This function enables us to estimate the wavelength by setting and monitoring the drive current and device temperature. The same procedure is done for output power estimation. We measured the wavelength estimation accuracy using two practical DFB-LDs and confirmed that the discrepancy between the estimated wavelength and the measured wavelength was less than ±1 GHz.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. Kawai, N. Yoshimoto, K. Iwatsuki, and T. Imai "Simple and cost effective wavelength setting and monitoring method using software-based wavelength estimation for WDM pluggable optical transceiver", Proc. SPIE 6775, Active and Passive Optical Components for Communications VII, 67750E (10 September 2007); https://doi.org/10.1117/12.735172
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transceivers

Modulation

Continuous wave operation

Light sources

Temperature metrology

Wavelength division multiplexing

Automatic control

Back to Top