Paper
8 January 2008 Plate film waveguide fabrication with sol-gel coating technology
Zhilin Zhang, Miao Ye, Weimin Sun
Author Affiliations +
Abstract
Optical plane waveguide is wildly used in optical communications and sensors. There are many methods to fabricate the optical plane waveguide. The sol-gel coating method is one of the easiest ways. TiO2 plane waveguides were fabricated on glass substrates in experiments. The fabrication methods are investigated under different conditions. There are many factors can influence the quality of the plane waveguide, such as the concentrations of sol-gel solutions, the pH value of the solutions, the dripping speed of the sol-gel drop, the heating process and so on. The characteristics of plane waveguides under different operating conditions are tested. The factors affecting the quality of the plane waveguide are analyzed. The experimental results show that the sol-gel coating method is a simple way to fabricate high quality plane waveguide under carefully controlling of the conditions.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhilin Zhang, Miao Ye, and Weimin Sun "Plate film waveguide fabrication with sol-gel coating technology", Proc. SPIE 6838, Optoelectronic Devices and Integration II, 683823 (8 January 2008); https://doi.org/10.1117/12.757955
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Sol-gels

Coating

Glasses

Heat treatments

Metals

Particles

RELATED CONTENT

New spectroelectrochemical sensor
Proceedings of SPIE (March 26 1998)
CdS- and PbS-doped silica-titania optical waveguides
Proceedings of SPIE (October 13 1994)
Fiber With High Tensile Strength
Proceedings of SPIE (April 15 1986)

Back to Top