The limitations of high-index resists for 193-nm hyper-NA lithography

Gregory McIntyre; Daniel Sanders; Ratnam Sooriyakumaran; Hoa Truong; Robert Allen

doi:10.1117/12.773114

26 March 2008 The limitations of high-index resists for 193-nm hyper-NA lithography

Gregory McIntyre, Daniel Sanders, Ratnam Sooriyakumaran, Hoa Truong, Robert Allen

Author Affiliations +

Proceedings Volume 6923, Advances in Resist Materials and Processing Technology XXV; 692304 (2008) https://doi.org/10.1117/12.773114
Event: SPIE Advanced Lithography, 2008, San Jose, California, United States

Abstract

This paper will investigate the potential benefits and limitations of increasing the refractive index of the photoresist for water and high-index immersion based lithography. The primary potential benefits are increased exposure latitude due to restoration of the TM polarization component and improved depth of focus due to a delay in the onset of image-induced top-loss. After first understanding the physical origins of these effects, a series of simulation studies will probe the level of impact they may have for the 32nm and 22nm technology nodes. It is concluded that, although they may provide some process latitude relief, the benefits are minimal for 1.35NA water immersion, especially when weighed against the likely required development effort and cost. The benefits are slightly more compelling for high-index immersion (>1.5 NA), but a high index resist does not appear to be critical, provided the resist is at least as large as the immersion fluid index. A comparable benefit can be achieved with a conventional resist by using polarized illumination (a trend already happening for various reasons) and thinning the resist by ~9% for 1.35NA water immersion and ~15% for 1.55NA high-index immersion. Additionally, increasing the refractive index is typically accompanied by a corresponding increase in absorption. This will be addressed, concluding the limitations of absorption are likely chemical and not optical in nature. High absorption is likely tolerable, provided the chemistry can be engineered to account for exponential intensity decay. The level of difficulty in doing so is addressed.

Citation Download Citation

Gregory McIntyre, Daniel Sanders, Ratnam Sooriyakumaran, Hoa Truong, and Robert Allen "The limitations of high-index resists for 193-nm hyper-NA lithography", Proc. SPIE 6923, Advances in Resist Materials and Processing Technology XXV, 692304 (26 March 2008); https://doi.org/10.1117/12.773114

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE