Paper
17 September 2008 Characteristic x-ray generator and its applications
Author Affiliations +
Abstract
Characteristic x-ray generator consists of a constant high-voltage power supply, a filament power supply, a turbomolecular pump, and an x-ray tube. The x-ray tube is a demountable diode which is connected to the turbomolecular pump and consists of the following major devices: a pipe-shaped molybdenum hole target, a tungsten hairpin cathode (filament), a focusing (Wehnelt) electrode, a polyethylene terephthalate x-ray window 0.25 mm in thickness, and a stainless-steel tube body. In the x-ray tube, the positive high voltage is applied to the anode (target) electrode, and the cathode is connected to the tube body (ground potential). In this experiment, the tube voltage applied was from 25 to 35 kV, and the tube current was regulated to within 10 μA by the filament temperature. The exposure time is controlled in order to obtain optimum x-ray intensity. The electron beams from the cathode are converged to the target by the focusing electrode, and sharp K-series characteristic x-rays are produced through the focusing electrode at a tube voltage of 35 kV. Using this generator, we performed monochromatic radiography, monochromatic x-ray computed tomography, and x-ray fluorescence analysis.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eiichi Sato, Hiroshi Matsukiyo, Akihiro Osawa, Toshiyuki Enomoto, Manabu Watanabe, Jiro Nagao, Akira Ogawa, and Shigehiro Sato "Characteristic x-ray generator and its applications", Proc. SPIE 7080, Penetrating Radiation Systems and Applications IX, 70800N (17 September 2008); https://doi.org/10.1117/12.796064
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
X-rays

Molybdenum

Electrodes

X-ray fluorescence spectroscopy

X-ray detectors

Radiography

Sensors

Back to Top