Surface quality of a 1m Zerodur part using an effective grinding mode

X. Tonnellier; P. Shore; P. Morantz; D. Orton

doi:10.1117/12.797451

25 September 2008 Surface quality of a 1m Zerodur part using an effective grinding mode

X. Tonnellier, P. Shore, P. Morantz, D. Orton

Proceedings Volume 7102, Optical Fabrication, Testing, and Metrology III; 71020B (2008) https://doi.org/10.1117/12.797451
Event: Optical Systems Design, 2008, Glasgow, Scotland, United Kingdom

Abstract

A new ultra precision large optics grinding machine, BoX ^(R) , has been developed at Cranfield University. This machine is located at the UK's Ultra Precision Surfaces laboratory at the OpTIC Technium, North Wales. This machine offers a rapid and economic solution for grinding large off-axis aspherical and free-form optical components. This paper presents an analysis of surface and subsurface damage assessments of Zerodur(R) ground using diamond resin bonded grinding wheels. Zerodur^(R) was tested as it is one of the materials currently under study for making extremely large telescope (ELT) segmented mirrors such as in the E-ELT project. The grinding experiments have been conducted on the BoX(R) grinding machine using wheels with grit sizes of 76 μm, 46 µm and 25 μm. The highest material removal rate (187.5 mm3/s) used ensures that a 1 metre diameter optic can be ground in less than 10 hours. The surface roughness and surface profile were measured using a Form Talysurf. The subsurface damage was revealed using a sub aperture polishing process in combination with an etching technique on small parts. These results are compared with the targeted form accuracy of 1 μm p-v over a 1 metre part, surface roughness of 50-150 nm RMS and subsurface damage in the range of 2-5 μm. This process stage was validated on a 1 metre hexagonal Zerodur^(R) part.

Citation Download Citation

X. Tonnellier, P. Shore, P. Morantz, and D. Orton "Surface quality of a 1m Zerodur part using an effective grinding mode", Proc. SPIE 7102, Optical Fabrication, Testing, and Metrology III, 71020B (25 September 2008); https://doi.org/10.1117/12.797451

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available