Paper
1 October 2009 Thermal performance prediction of the TMT telescope structure
Author Affiliations +
Abstract
Thermal analysis for the Thirty Meter Telescope (TMT) structure was performed using finite element analysis in ANSYS and I-DEAS. In the thermal analysis, the telescope structural parts with simplified optical assembly systems were modeled for various thermal conditions including air convections, conductions, heat flux loadings, and radiations. Thermal responses of the TMT telescope structure were predicted and the temperature distributions of the optical assembly systems were calculated under sample thermal loading conditions. The thermo-elastic analysis was made to obtain the thermal deformation based on the resulting temperature distributions. The line of sight calculation was made using the thermally induced structural deformations. The goal of this thermal analysis is to establish thermal models by the FEA programs to simulate for an adequate thermal environment. These thermal models can be utilized for estimating the thermal responses of the TMT structure. Thermal performance prediction of the TMT structure will be able to guide us to control and maintain the system from the "seeing" effects.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Myung Cho, Andrew Corredor, Konstantinos Vogiatzis, and George Angeli "Thermal performance prediction of the TMT telescope structure", Proc. SPIE 7427, Optical Modeling and Performance Predictions IV, 74270E (1 October 2009); https://doi.org/10.1117/12.828057
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Telescopes

Thirty Meter Telescope

Convection

Finite element methods

Thermal modeling

Thermal analysis

Electronics

RELATED CONTENT

From giant telescopes design a new method of modal...
Proceedings of SPIE (August 29 2022)
JCMT active surface control system: implementation
Proceedings of SPIE (May 26 1998)
Thermal analysis of the TMT telescope structure
Proceedings of SPIE (August 04 2010)
Thermal modeling of the TMT Telescope
Proceedings of SPIE (November 10 2011)
Model order reduction of structural dynamics of a very large...
Proceedings of SPIE (September 16 2004)

Back to Top