Paper
13 May 2010 Monitoring of a steel incrementally launched bridge construction with strain and temperature FBGs sensors
Antonio Bueno, Benjamín Torres, David Barrera, Pedro Calderón, Salvador Sales
Author Affiliations +
Abstract
We present in this paper the results of monitoring the construction process of a steel incrementally launched bridge located at the Kadagua Valley in Bilbao (Spain) with FBG sensors. The installation of FBG strain and temperature sensors was done in order to obtain deformation and temperature variations during the launching operation. The deflection recovery process was also monitored. The setup carried out in the sensors installation process consists of five optical channels (one for each cross section monitored) and a multiplexed structure of nine strain sensor in each optical channel. Temperature sensors were also installed in order to measure temperature variation of the steel structure but also for thermal compensation for the FBG strain sensors. The installation of the optical sensors is explained in detail including cleaning, bonding and connection of the almost fifty sensors installed in this structure. We also are going to explain the behaviour of the steel structure by presenting several figures showing the strain values for each sensor taken in real time during the launching of the bridge.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Antonio Bueno, Benjamín Torres, David Barrera, Pedro Calderón, and Salvador Sales "Monitoring of a steel incrementally launched bridge construction with strain and temperature FBGs sensors", Proc. SPIE 7726, Optical Sensing and Detection, 772620 (13 May 2010); https://doi.org/10.1117/12.854575
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Bridges

Fiber Bragg gratings

Optical sensors

Channel projecting optics

Adhesives

Temperature sensors

Back to Top