A novel optical sensor for mirror edge sensing

D. A. H. Buckley; S. Buous; H. Gajjar; J. W. Menzies; F. Schindler; K. Sändig; S. Lévêque

doi:10.1117/12.858131

19 July 2010 A novel optical sensor for mirror edge sensing

D. A. H. Buckley, S. Buous, H. Gajjar, J. W. Menzies, F. Schindler, K. Sändig, S. Lévêque

Author Affiliations +

Proceedings Volume 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation; 773912 (2010) https://doi.org/10.1117/12.858131
Event: SPIE Astronomical Telescopes + Instrumentation, 2010, San Diego, California, United States

Abstract

The Southern African Large Telescope (SALT) recently (2008) abandoned attempts at using capacitive mirror edge sensors, mainly due to poor performance at a relative humidity above ~60%, a not infrequent occurrence. Different technologies are now being explored for alternative sensors on SALT. In this paper we describe the design and development of a novel prototype optical edge sensor, based on the application of the interferential scanning principle, as used in optical encoders. These prototype sensors were subsequently tested at SAAO and ESO, for potential application on SALT and E-ELT. Environmental tests, conducted in climatic control chambers, looked at temperature and relative humidity sensitivity, long term stability and sensor noise. The temperature sensitivity for height and gap were, respectively, 10nm/°C and 44nm/°C, while for relative humidity they were 4nm/10% and 50nm/10%, respectively. These either met, or were close to, the SALT specification. While there were significant lags in response, this was due to the sensor's relatively large mass (~200 gm per sensor half), which was not optimized. This is likely to improve, should a revised design be developed in future. Impressively the sensor noise was <0.015 nm RMS, over three orders of magnitude better than the specification. Our conclusions are that optical edge sensing is a viable technique for use on segmented mirror telescopes.

Citation Download Citation

D. A. H. Buckley, S. Buous, H. Gajjar, J. W. Menzies, F. Schindler, K. Sändig, and S. Lévêque "A novel optical sensor for mirror edge sensing", Proc. SPIE 7739, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation, 773912 (19 July 2010); https://doi.org/10.1117/12.858131

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE