Variable-focal lens using electroactive polymer actuator

V. Vunder; A. Punning; A. Aabloo

doi:10.1117/12.880608

27 April 2011 Variable-focal lens using electroactive polymer actuator

V. Vunder, A. Punning, A. Aabloo

Proceedings Volume 7977, Active and Passive Smart Structures and Integrated Systems 2011; 79771E (2011) https://doi.org/10.1117/12.880608
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2011, San Diego, California, United States

Abstract

The paper describes a simple and cost-effective design and fabrication process of a liquid-filled variable-focal lens. The lens was made of soft polymer material, its shape and curvature can be controlled by hydraulic pressure. An electroactive polymer is used as an actuator. A carbon-polymer composite (CPC) was used. The device is composed of elastic membrane upon a circular lens chamber, a reservoir of liquid, and a channel between them. It was made of three layers of polydimethylsiloxane (PDMS), bonded using the partial curing technique. The channels and reservoir were filled with incompressible liquid after curing process. A CPC actuator was mechanically attached to reservoir to compress or decompress the liquid. Squeezing the liquid between the reservoir and the lens chamber will push the membrane inward or outward resulting in the change of the shape of the lens and alteration of its focal length. Depending on the pressure the lens can be plano-convex or plano-concave or even switch between the two configurations. With only a few minor modifications it is possible to fabricate bi-convex and bi-concave lenses. The lens with a 1 mm diameter and the focal length from infinity to 17 mm is reported. The 5x15mm CPC actuator with the working voltage of only up to ±2.5 V was capable to alter the focal length within the full range of the focal length in 10 seconds.

Citation Download Citation

V. Vunder, A. Punning, and A. Aabloo "Variable-focal lens using electroactive polymer actuator", Proc. SPIE 7977, Active and Passive Smart Structures and Integrated Systems 2011, 79771E (27 April 2011); https://doi.org/10.1117/12.880608

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available