The design and simulation of single detector MIR spectrometer based on MEMS scanning mirror

Zhong-wei Zhang; Zhi-yu Wen; Tian-ling Zeng; Kang-lin Wei

doi:10.1117/12.900817

8 September 2011 The design and simulation of single detector MIR spectrometer based on MEMS scanning mirror

Zhong-wei Zhang, Zhi-yu Wen, Tian-ling Zeng, Kang-lin Wei

Proceedings Volume 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications; 81933L (2011) https://doi.org/10.1117/12.900817
Event: International Symposium on Photoelectronic Detection and Imaging 2011, 2011, Beijing, China

Abstract

Infrared (IR) spectrometers are very important optical equipments that can be used in industry, science, medicine, agriculture, biology and food safety etc., and the market is growing. However, most traditional IR spectrometers, such as Fourier transform spectrometer (FTS) that based on Michelson interferometer principle and scanning monochromator that based on grating scanning, are expensive, relative large volume, and stationary, which can't meet the requirements of specific application such as rapidity, special environment and some special samples. To overcome these drawbacks, innovatory technology-micro electro mechanical systems (MEMS) technology was used in micro IR spectrometers in the past few years. And several prototypes and products that based on several operational principles have been emerged. In this paper, a novel IR micro spectrometer which based on MEMS technology and used single element detector was presented over a wide spectral range (from 2500nm to 5000nm) in the mid infrared (MIR) wavelength regime, and the optical system of it was designed on the basis of traditional scanning monochromator principle. In the optical system, there is a highlighted characteristic that dual spherical focus mirror was used to focus the diffraction light of the diffraction grating, which improved the spectral resolution of the optical system. Finally, using Zemax optical software, three torsion angle locations were selected to simulate the optical system of the spectrometer with the slit's size 0.1mm×1mm. The simulation result indicated that in the whole wavelength range the spectral resolution of the optical system was less than 30nm, and a high accuracy MIR spectrometer with compact volume will be realized in future hopefully.

Citation Download Citation

Zhong-wei Zhang, Zhi-yu Wen, Tian-ling Zeng, and Kang-lin Wei "The design and simulation of single detector MIR spectrometer based on MEMS scanning mirror", Proc. SPIE 8193, International Symposium on Photoelectronic Detection and Imaging 2011: Advances in Infrared Imaging and Applications, 81933L (8 September 2011); https://doi.org/10.1117/12.900817

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available