Developing metal coated mesh filters for mid-infrared astronomy

Shigeyuki Sako; Takashi Miyata; Takafumi Kamizuka; Tomohiko Nakamura; Kentaro Asano; Mizuho Uchiyama; Takashi Onaka; Itsuki Sakon; Takehiko Wada

doi:10.1117/12.925768

13 September 2012 Developing metal coated mesh filters for mid-infrared astronomy

Shigeyuki Sako, Takashi Miyata, Takafumi Kamizuka, Tomohiko Nakamura, Kentaro Asano, Mizuho Uchiyama, Takashi Onaka, Itsuki Sakon, Takehiko Wada

Author Affiliations +

Proceedings Volume 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II; 84503V (2012) https://doi.org/10.1117/12.925768
Event: SPIE Astronomical Telescopes + Instrumentation, 2012, Amsterdam, Netherlands

Abstract

A metal mesh filter is appropriate to a band-pass filter for astronomy in the long mid-infrared between 25 and 40 μm, where most of optical materials are opaque. The mesh filter does not require transparent dielectric materials unlike interference filters because the transmission characteristics bare determined by surface plasmon-polariton (SPP) resonances excited on a metal surface with a periodic structure. In this study, we have developed the mesh filters optimized to atmospheric windows at 31.8 and 37.5 μm accessible from the Chajnantor site of 5,640 m altitude. First, mesh filters made of a gold film of 2 μm thickness have been fabricated. Four identical film-type filters are stacked incoherently to suppress leakages at stop-bands. The transmissions of the stacked filters have been measured to be 0.8 at the peaks and below 1 x 10^-3 at the stop-bands at 4 K. The ground-based mid-infrared camera MAX38 has been equipped with the stacked filters and successfully obtained diffraction-limited stellar images at the Chajnantor site. The film-type mesh filter does not have sufficient mechanical strength for a larger aperture and for use in space. We have developed mesh filters with higher strength by applying the membrane technology for x-ray optics. The membrane-type mesh filter is made of SiC and coated with a thin gold layer. The optical performance of the mesh filter is independent of internal materials in principle because the SPP resonances are excited only on the metal surface. The fabricated membrane-type mesh filter has been confirmed to provide comparable optical performance to the film-type mesh filter.

Citation Download Citation

Shigeyuki Sako, Takashi Miyata, Takafumi Kamizuka, Tomohiko Nakamura, Kentaro Asano, Mizuho Uchiyama, Takashi Onaka, Itsuki Sakon, and Takehiko Wada "Developing metal coated mesh filters for mid-infrared astronomy", Proc. SPIE 8450, Modern Technologies in Space- and Ground-based Telescopes and Instrumentation II, 84503V (13 September 2012); https://doi.org/10.1117/12.925768

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available