Model-based validation and development of LED-systems: MValEnt

Roland Lachmayer; Serge Stephan

doi:10.1117/12.981386

18 December 2012 Model-based validation and development of LED-systems: MValEnt

Roland Lachmayer, Serge Stephan

Author Affiliations +

Proceedings Volume 8550, Optical Systems Design 2012; 855031 (2012) https://doi.org/10.1117/12.981386
Event: SPIE Optical Systems Design, 2012, Barcelona, Spain

Abstract

Durability of LEDs is usually specified to 10,000 hours though numerous LED products feature a lesser operation life. This might be caused by faulty constructions or improper physical environments and operating conditions. Since such failure cannot be accepted for cost intensive applications in automotive, medical or illuminating engineering simulation based prediction of LEDs durability is a promising design approach. Main causes of degradation are manufacturing and operation temperatures or temperature gradients, respectively. These result in an increased diffusion, accelerated chemical reactions and induced material stresses. In a consequence, chemical, physical and mechanical properties of parts are altered. To investigate conditions of LED operation, LEDs degradation and conditions of failure a test environment considering electrical and thermal loads as well as optical emission has been designed. Furthermore, the LED test environment has been modelled within the software application MatLAB/Simulink to simulate and predict the durability of complex LED-systems. Test environment, computer-aided simulation and a test design using design of experiments are combined to a design tool named MValEnt. This supports validation and design of complex LED-systems for varied conditions of operations and component characteristics. Integrated data interfaces provide an iterative product development. Load measurements reveal different failure mechanisms due to characteristics of operating current, ambient temperature and pulse-width modulation (pwm) as well as operation interruptions. Electrical and thermal coupling of LED circuits results in additional loads and thus degradation. With increasing power mechanisms of LEDs degradation are comparable to those found in power electronics.

Citation Download Citation

Roland Lachmayer and Serge Stephan "Model-based validation and development of LED-systems: MValEnt", Proc. SPIE 8550, Optical Systems Design 2012, 855031 (18 December 2012); https://doi.org/10.1117/12.981386

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE