Paper
11 December 2012 A novel 32×1 readout integrated circuit with high dynamic range for IRFPA
Zhuang Miao, Ning Li, Zhifeng Li
Author Affiliations +
Abstract
In this paper, a novel 32×1 ROIC with high dynamic range is presented. The ROIC contains a capacitive transimpedance input amplifier (CTIA integrator), followed by a comparator that set a threshold voltage for comparing the integrating signal. It contains the time-to-threshold information in adding additional dynamic range with a linear voltage ramp input, in addition to the regular integration signal. By the end of integration, if the integration signal is less than the threshold voltage, the integration signal is sampled for readout. When the integrating signal is reached to the threshold voltage before the end of integration, the ramping voltage is stored and later sampled for readout in representing the signal level and a digital flag is set in recording the event of trigger. Thus, a high level signal can be saved before it saturating the integrator. A test chip of 32×1 ROIC is designed and fabricated with 0.35 μm triple metal, double poly CMOS technology. The chip test results prove correct function of the circuit with 3.3 V power supply. The results of tracing one channel show that the dynamic range increases 54 dB with a 10-bit ADC and the readout clock frequency is up to 10 MHz.
© (2012) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhuang Miao, Ning Li, and Zhifeng Li "A novel 32×1 readout integrated circuit with high dynamic range for IRFPA", Proc. SPIE 8562, Infrared, Millimeter-Wave, and Terahertz Technologies II, 856225 (11 December 2012); https://doi.org/10.1117/12.982004
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Readout integrated circuits

High dynamic range imaging

Sensors

Signal detection

Clocks

CMOS technology

Information fusion

Back to Top