Paper
10 April 2013 Simulation study of semi-active control of stay cable using MR damper under wind loads
Jiangyun Liu, Hongwei Huang, Limin Sun
Author Affiliations +
Abstract
This paper aims to evaluate the effectiveness of MR damper for vibration mitigation of stay cable under complex wind excitations. The MR damper, RD-1005-03, provided by Lord Company was used, a semi-active control algorithm based on the universal design curve for linear dampers and the bilinear mechanical model of the MR damper was developed, and simulation study was carried out for the cable-MR damper system. Firstly, fluctuating wind field was generated using the method of weighted amplitude wave superposition (WAWS) and Kaimal spectrum and the time-history sample curve of turbulent wind speed of stay cable was obtained. Then the dynamic response of the cable-MR damper system was computed with the proposed semi-active control algorithm applied for mitigating the vibration of stay cable. Finally, the effectiveness of MR damper for controlling cable vibration was assessed by comparing the dynamic responses of stay cable before and after damper installation.
© (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiangyun Liu, Hongwei Huang, and Limin Sun "Simulation study of semi-active control of stay cable using MR damper under wind loads", Proc. SPIE 8688, Active and Passive Smart Structures and Integrated Systems 2013, 868822 (10 April 2013); https://doi.org/10.1117/12.2009565
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Control systems

Computer simulations

Algorithm development

Superposition

Bridges

Vibration control

Wind energy

Back to Top