Paper
22 October 1976 Polarizing Optical Components For High Power Glass Laser Systems
Stanley Refermat, Jay Eastman
Author Affiliations +
Abstract
Large glass laser systems used in laser fusion research operate with intrasystem power densities of up to 1010 W/cm2. These multibeam laser systems utilize numerous subassemblies to perform various tasks. Polarization components are important elements in subassemblies such as unidirectional optical isolators, bidirectional optical isolators and variable ratio beam dividers. At power densities of gigawatts/cm2, nonlinear effects limit the power level that can be prieagatV through a glass laser system. An intensity induced refractive index change of PPM at levels of 1010 w/cm2 can cause whole beam self-focusing and small scale beam break-up. Polarization components for use in these systems must be selected on the basis of minimal contribution to nonlinear phenomena as well as acceptable optical performance. Nonlinear considerations exclude the use of such components as birefringent crystal polarizers and the MacNeille polarizer in the presence of gigawatt/cm power densities. Thin film plate polarizers are used in large aperture low contrast applications because they combine acceptable optical performance with a relatively low nonlinear contribution. This review paper describes some commonly used polarization components and discusses their applicability to high power glass laser systems.
© (1976) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stanley Refermat and Jay Eastman "Polarizing Optical Components For High Power Glass Laser Systems", Proc. SPIE 0088, Polarized Light: Instruments, Devices, Applications, (22 October 1976); https://doi.org/10.1117/12.955010
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polarizers

Glasses

Polarization

Laser systems engineering

Laser glasses

High power lasers

Beam splitters

Back to Top