Laser annealing and simulation of amorphous silicon thin films for solar cell applications

I. Theodorakos; Y. S. Raptis; V. Vamvakas; D. Tsoukalas; I. Zergioti

doi:10.1117/12.2038557

6 March 2014 Laser annealing and simulation of amorphous silicon thin films for solar cell applications

I. Theodorakos, Y. S. Raptis, V. Vamvakas, D. Tsoukalas, I. Zergioti

Author Affiliations +

Proceedings Volume 8967, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XIX; 89670T (2014) https://doi.org/10.1117/12.2038557
Event: SPIE LASE, 2014, San Francisco, California, United States

Abstract

In this work, a picosecond DPSS and a nanosecond Nd:YAG laser have been used for the annealing and the partial nanocrystallization of an amorphous silicon layer. These experiments were conducted in order to improve the characteristics of a micromorph tandem solar cell. The laser annealing was attempted at 1064nm in order to obtain the desired crystallization’s depth and ratios. Preliminary annealing-processes, with different annealing parameters, have been tested, such as fluence, repetition rate and number of pulses. Irradiations were applied in the sub-melt regime, in order to prevent significant diffusion of p- and n-dopants to take place within the structure. The laser experimental work was combined with simulations of the laser annealing process, in terms of temperature distribution evolution, using the Synopsys Sentaurus Process TCAD software. The optimum annealing conditions for the two different pulse durations were determined. Experimentally determined optical properties of our samples, such as the absorption coefficient and reflectivity, were used for a more realistic simulation. From the simulations results, a temperature profile, appropriate to yield the desired recrystallization was obtained for the case of ps pulses, which was verified from the experimental results described below. The annealed material was studied, as far as it concerns its structural properties, by XRD, SEM and micro-Raman techniques, providing consistent information on the characteristics of the nanocrystalline material produced by the laser annealing experiments. It was found that, with the use of ps pulses, the resultant polycrystalline region shows crystallization’s ratios similar to a PECVD developed poly-Silicon layer, with slightly larger nanocrystallite’s size.

Citation Download Citation

I. Theodorakos, Y. S. Raptis, V. Vamvakas, D. Tsoukalas, and I. Zergioti "Laser annealing and simulation of amorphous silicon thin films for solar cell applications", Proc. SPIE 8967, Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XIX, 89670T (6 March 2014); https://doi.org/10.1117/12.2038557

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE