Design of a fused optical fibre bundle-based receiver for low-altitude profiling of water vapour using Raman lidar

Sangeetha N.; Bhavani Kumar Yellapragada; Venkata Rajanikanth Machavaram

doi:10.1117/12.2223521

5 May 2016 Design of a fused optical fibre bundle-based receiver for low-altitude profiling of water vapour using Raman lidar

Sangeetha N., Bhavani Kumar Yellapragada, Venkata Rajanikanth Machavaram

Author Affiliations +

Proceedings Volume 9879, Lidar Remote Sensing for Environmental Monitoring XV; 98790C (2016) https://doi.org/10.1117/12.2223521
Event: SPIE Asia-Pacific Remote Sensing, 2016, New Delhi, India

Abstract

Water vapour profiling of surface layer, which constitutes the lowest hundred meters from earth’s surface, can aid in the understanding of spatial variability of atmospheric turbulence and the dynamics of boundary layer. In lidars, the effective area of an optical fiber-based receiver, also called the aperture stop diameter, controls the field of view of the telescope which in turn governs the overlap function. We determined overlap function vs altitude for different aperture stop diameters which showed that lower altitude profiling requires fibre receivers of larger effective area positioned at the location of blur disk or the position of maximum capture of back scattered light. We report on the design of a receiver which comprises of a converging lens system in conjunction with a commercially available fibre bundle of fused hexagonal shaped fibres of adequate numerical aperture and enhanced effective light capturing area. For a specified biaxial Raman lidar system with an excitation laser emitting at 532 nm, placing a one inch diameter lens at the plane of blur disk of diameter ~21 mm and the aforesaid fibre bundle of diameter 7.3 mm at the image plane of the blur disk was found to be suitable for relatively efficient light capture to enable profiling from an altitude of ~8m and above. The light capturing efficiency of the system was determined and compared with that of a conventional circular fibre-based bundle of same diameter. The proposed receiver design offers potential solution for low altitude profiling with reduced central obscuration.

Citation Download Citation

Sangeetha N., Bhavani Kumar Yellapragada, and Venkata Rajanikanth Machavaram "Design of a fused optical fibre bundle-based receiver for low-altitude profiling of water vapour using Raman lidar", Proc. SPIE 9879, Lidar Remote Sensing for Environmental Monitoring XV, 98790C (5 May 2016); https://doi.org/10.1117/12.2223521

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Receivers

Profiling

LIDAR

Cladding

Optical fibers

Telescopes

Raman spectroscopy

Show All Keywords

Keywords/Phrases

Search In:

Publication Years