1 January 2011 Accurate measurement of very small line patterns in critical dimension scanning electron microscopy using model-based library matching technique
Author Affiliations +
Abstract
Our purpose is to reduce the critical dimension (CD) bias for very small patterns with line widths of <15 nm. The model-based library (MBL) method, which estimates the dimensions and shape of a target pattern by comparing a measured scanning electron microscopy image waveform with a library of simulated waveforms, was modified in two ways. The first modification was the introduction of line-width variation into the library to overcome problems caused by significant changes in waveform due to changes in both sidewall shape and line width. The second modification was the fixation of MBL tool parameters to overcome problems caused by the reduction in pattern shape information due to merging of right and left white bands. We verified the effectiveness of the modified MBL method by applying it to actual silicon patterns with line widths in the range 10-30 nm. The CD bias measured by MBL method for three heights (20, 50, and 80%) was consistent with the atomic force microscopy results. The CD biases at all heights were <0.5 nm, and the slopes of the CD biases with respect to the CD were <3%.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Chie Shishido, Maki Tanaka, and Mayuka Osaki "Accurate measurement of very small line patterns in critical dimension scanning electron microscopy using model-based library matching technique," Journal of Micro/Nanolithography, MEMS, and MOEMS 10(1), 013010 (1 January 2011). https://doi.org/10.1117/1.3541780
Published: 1 January 2011
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Critical dimension metrology

Atomic force microscopy

Scanning electron microscopy

Critical dimension scanning electron microscopy

Monte Carlo methods

Model-based design

Silicon

RELATED CONTENT


Back to Top