1 May 1994 High-speed laser speckle photography. Part 1: repetitively Q-switched ruby laser light source
Author Affiliations +
Abstract
A system to record laser speckle photographs at framing rates in the range of 105 to 106 frames/s has been developed, based on a repetitively Q-switched ruby laser and rotating mirror high-speed camera. The laser and electro-optic modulator are described. The circuit diagram for an inexpensive high-voltage amplifier, capable of switching 2.5 kV at up to 1 MHz with fall and rise times of 100 and 200 ns, respectively, is given. The resulting optical pulse trains have pulse energy fluctuations at half the driving frequency. We show how these may be suppressed by reducing the time the Q-switch is left open. Both the subharmonic component and its suppression are explained from limiting cases of the laser rate equations. Representative pulse trains over a range of repetition rates are given; pulse energies greater than 20 mJ with pulse energy fluctuations of less than plus or minus one-half of a stop are obtained at rates of up to 500 kHz.
Jonathan Mark Huntley "High-speed laser speckle photography. Part 1: repetitively Q-switched ruby laser light source," Optical Engineering 33(5), (1 May 1994). https://doi.org/10.1117/12.168542
Published: 1 May 1994
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ruby lasers

Q switched lasers

Q switches

Camera shutters

High speed photography

Photography

Light sources

RELATED CONTENT

High-speed laser speckle photography
Proceedings of SPIE (December 01 1991)
Investigation Of The Motion Of Very Fast Droplets Using The...
Proceedings of SPIE (September 01 1987)
Russian version of Cranz-Schardin method
Proceedings of SPIE (May 28 1997)
A Multi-Purpose Ultra High Speed Camera System
Proceedings of SPIE (September 26 1965)

Back to Top