Temporal pulse shaping for smoothing of printed metal surfaces

Yuval Berg; Michael Zenou; Omer Dolev; Zvi Kotler

doi:10.1117/1.OE.54.1.011010

13 January 2015 Temporal pulse shaping for smoothing of printed metal surfaces

Yuval Berg, Michael Zenou, Omer Dolev, Zvi Kotler

Author Affiliations +

Optical Engineering, Vol. 54, Issue 1, 011010 (January 2015). https://doi.org/10.1117/1.OE.54.1.011010

Abstract

The surfaces of laser-induced forward transfer (LIFT) printed metal structures show typical roughness characteristic of the metal droplet size (3 to 10 μm). Submicron voids are often observed in the bulk of such printed metal structures with consequences on the mechanical strength, chemical resistivity, and electrical conductivity. We present the results of our efforts to reduce surface roughness and bulk voids by controlled laser melting. We have used temporally shaped pulses from a fiber laser tunable in the range from 1 to 600 ns in order to improve the quality of LIFT printed copper and aluminum structures. For the best case shown, roughness was improved from R_RMS=0.8 μm to R_RMS=0.2 μm and the relative percentage of the voids was reduced from 7.3% to 0.9%.

Citation Download Citation

Yuval Berg, Michael Zenou, Omer Dolev, and Zvi Kotler "Temporal pulse shaping for smoothing of printed metal surfaces," Optical Engineering 54(1), 011010 (13 January 2015). https://doi.org/10.1117/1.OE.54.1.011010

Published: 13 January 2015

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE