Aspera is the UV small-satellite mission to detect and map the warm-hot phase gas in nearby galaxy halo. Aspera was chosen as one of NASA's Astrophysics Pioneers missions in 2021 and employs a FUV long-slit spectrograph payload, optimized for low-surface brightness O VI emission line detection at 103-104 nm. The mission incorporates state-of-the-art UV technologies such as high-efficiency micro-channel plates and enhanced LiF coating to achieve a high level of diffuse-source sensitivity of the payload, down to 5.0E-19 erg/s/cm^2/arcsec^2. The combination of the high sensitivity and a 1-degree by 30-arcsecond long-slit field of view enables efficient 2D mapping of diffuse halo gas through step and stare concept observation. Aspera is presently in the critical design phase, with an expected launch date in mid-2025. This work provides a current overview of the Aspera payload design.
Aspera is an extreme-UV (EUV) Astrophysics small satellite telescope designed to map the warm-hot phase coronal gas around nearby galaxy halos. Theory suggests that this gas is a significant fraction of a galaxy’s halo mass and plays a critical role in its evolution, but its exact role is poorly understood. Aspera observes this warm-hot phase gas via Ovi emission at 1032 °A using four parallel Rowland-Circle-like spectrograph channels in a single payload. Aspera’s robust-and-simple design is inspired by the FUSE spectrograph, but with smaller, four 6.2 cm × 3.7 cm, off-axis parabolic primary mirrors. Aspera is expected to achieve a sensitivity of 4.3×10−19 erg/s/cm2/arcsec2 for diffuse Ovi line emission. This superb sensitivity is enabled by technological advancements over the last decade in UV coatings, gratings, and detectors. Here we present the overall payload design of the Aspera telescope and its expected performance. Aspera is funded by the inaugural 2020 NASA Astrophysics Pioneers program, with a projected launch in late 2024.
The design of a CubeSat telescope for academic research purposes must balance complicated optical and structural designs with cost to maximize performance in extreme environments. Increasing the CubeSat size (eg. 6U to 12U) will increase the potential optical performance, but the cost will increase in kind. Recent developments in diamond-turning have increased the accessibility of aspheric aluminum mirrors, enabling a cost-effective regime of well-corrected nanosatellite telescopes. We present an all-aluminum versatile CubeSat telescope (VCT) platform that optimizes performance, cost, and schedule at a relatively large 95 mm aperture and 0.4 degree diffraction limited full field of view stablized by MEMS fine-steering modules. This study features a new design tool that permits easy characterization of performance degradation as a function of spacecraft thermal and structural disturbances. We will present details including the trade between on- and off-axis implementations of the VCT, thermal stability requirements and finite-element analysis, and launch survival considerations. The VCT is suitable for a range of CubeSat borne applications, which provides an affordable platform for astronomy, Earth-imaging, and optical communications.
Here we review the current optical mechanical design of MagAO-X. The project is post-PDR and has finished the design phase. The design presented here is the baseline to which all the optics and mechanics have been fabricated. The optical/mechanical performance of this novel extreme AO design will be presented here for the first time. Some highlights of the design are: 1) a floating, but height stabilized, optical table; 2) a Woofer tweeter (2040 actuator BMC MEMS DM) design where the Woofer can be the current f/16 MagAO ASM or, more likely, fed by the facility f/11 static secondary to an ALPAO DM97 woofer; 3) 22 very compact optical mounts that have a novel locking clamp for additional thermal and vibrational stability; 4) A series of four pairs of super-polished off-axis parabolic (OAP) mirrors with a relatively wide FOV by matched OAP clocking; 5) an advanced very broadband (0.5-1.7μm) ADC design; 6) A Pyramid (PWFS), and post-coronagraphic LOWFS NCP wavefront sensor; 7) a vAPP coronagraph for starlight suppression. Currently all the OAPs have just been delivered, and all the rest of the optics are in the lab. Most of the major mechanical parts are in the lab or instrument, and alignment of the optics has occurred for some of the optics (like the PWFS) and most of the mounts. First light should be in early 2019.
MagAO-X is an entirely new extreme adaptive optics system for the Magellan Clay 6.5 m telescope, funded by the NSF MRI program starting in Sep 2016. The key science goal of MagAO-X is high-contrast imaging of accreting protoplanets at Hα. With 2040 actuators operating at up to 3630 Hz, MagAO-X will deliver high Strehls (> 70%), high resolution (19 mas), and high contrast (< 1 × 10-4 ) at Hα (656 nm). We present an overview of the MagAO-X system, review the system design, and discuss the current project status.
High-speed optical photometry is characterizing man made satellites and space debris in Earth orbit. Commercially available Electron Multiplying CCD (EMCCD) imagers and cameras are driving a renaissance in this field, with several new instruments under development. The Steward Observatory Chimera Photometer provides simultaneous three-color photometry in the Sloan r’, i’, and z’ bands over a wide field of view. The design is optimized for the Steward Observatory Kuiper 1.58 m Telescope, although other telescopes can be supported with the exchange of the wide-field collimator. In this paper, the design and first light performance of the instrument is presented.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.