Silmaril is a new 3-telescope beam combiner at the CHARA Array. In this presentation, we present the current design of the instrument, its on-sky measured and theoretical best performance, and its future development. Its design is specifically made to push for sensitivity. It combines 3 beams of the CHARA Array, allowing closure phase measurement but limiting the loss in sensitivity. It limits the number of optical elements to the minimum needed for combining the 3 beams. Using a CRED ONE camera allows for sub-electron readout noise, which means that our sensitivity is limited by the thermal background. Long focal-length cylindrical mirrors limit the thermal background by using an f/20 cold stop in front of the camera. We use a low spectral resolution prism to allow fringe tracking without compromising the instrument’s sensitivity. Thanks to an ingenious edge filter design, we can observe both H- and K-band simultaneously, with a low thermal background on the H-band side of the detector. In the future, we intend to extend the instrument with a second set of 3 beams and add a Narcissus mirror to lower the thermal background and improve the sensitivity even more.
KEYWORDS: Cameras, Telescopes, Sensors, Stars, Data acquisition, Signal to noise ratio, K band, Mirrors, Design, Infrared cameras, Data acquisition boards, Astronomical telescopes
The newly installed Silmaril beam combiner at the CHARA array is designed to observe previously inaccessible faint targets, including Active Galactic Nuclei and T-Tauri Young Stellar Objects. Silmaril leverages cuttingedge optical design, low readout noise, and a high-speed C-RED1 camera to realize its sensitivity objectives. In this presentation, we offer a comprehensive overview of the instrument’s software, which manages critical functions, including camera data acquisition, fringe tracking, automatic instrument alignment, and observing interfaces, all aimed at optimizing on-sky data collection. Additionally, we offer an outline of the data reduction pipeline, responsible for converting raw instrument data products into the final OIFITS used by the standard interferometry modeling software. Finally, a thorough analysis of the camera and instrument characterization results will be presented, evaluating instrument performance in terms of sensitivity. The purpose of this paper is to provide a solid reference for studies based on Silmaril data.
The Center for High Angular Resolution Astronomy (CHARA) Array is a six-element interferometer with baselines ranging from 34 to 331m. The Array has had many upgrades in recent years including new beam combiners: MYSTIC is a 6T combiner for K-band; SPICA is a 6T combiner for the visible R-band; and SILMARIL is a 3T combiner for high sensitivity in the H- and K-bands. A seventh, mobile telescope is now on site for use with fiber optics for beam transport. Observing time is available to the community through a program funded by NSF. The observing programs are solicited and peer-reviewed by NSF’s NOIRLab. Here we summarize the scientific work and the on-going technical advances of the CHARA Array.
We report progress on Project Prime (PRecision Interferometry with MIRC for Exoplanets) to detect exoplanets using precision closures using MIRC-X and MYSTIC at CHARA. Our investigations include modeling systematics caused by OPD drifts, differential dispersion, beamtrain birefringence, and flatfielding errors. Injection tests suggest we can recover hot Jupiter companions as faint at 1/5000 of the host star brightness with 4 nights of observing and we will present some results of our recent searches for the hot Jupiters. Our upper limits are starting to constrain current-generation Global Circulation Models (GCMs). We propose the addition of modest nulling (10:1) to today’s interferometers in order to vastly increase the ease of this work and to open up many more targets for detections.
The Michigan Young Star Imager at CHARA (MYSTIC) is a K-band interferometric beam combining instrument funded by the U.S. National Science Foundation, designed primarily for imaging sub-au scale disk structures around nearby young stars and to probe the planet formation process. Installed at the CHARA Array in July 2021, with baselines up to 331 m, MYSTIC provides a maximum angular resolution of λ / 2B ∼ 0.7 mas. The instrument injects phase-corrected light from the array into inexpensive, single-mode, polarization maintaining silica fibers, which are then passed via a vacuum feedthrough into a cryogenic dewar operating at 220 K for imaging. MYSTIC uses a high frame rate, ultra-low read noise SAPHIRA detector and implements two beam combiners: a six-telescope image plane beam combiner, based on the MIRC-X design, for targets as faint as 7.7 Kmag, as well as a four-telescope integrated optic beam-combiner mode using a spare chip leftover from the GRAVITY instrument. MYSTIC is co-phased with the MIRC-X (J + H band) instrument for simultaneous fringe-tracking and imaging and shares its software suite with the latter to allow a single observer to operate both instruments. We present the instrument design, review its operational performance, present early commissioning science observations, and propose upgrades to the instrument that could improve its K-band sensitivity to 10th magnitude in the near future.
MIRC-X and MYSTIC are six telescope all-in-one beam combiners at the CHARA array, Mount Wilson Observatory, USA. These two instruments make simultaneous cophasing observations in J + H + K-band wavelengths and deliver λ/2B~0.5 mas angular resolution imaging utilizing the world's largest baseline lengths ranging from 30-330 m. MIRC-X and MYSTIC are operated in two observing modes based on the target spectrum and their over-resolved nature: (i) primary-secondary and (ii) combined mode. In the primary-secondary mode, we use one instrument as a fringe tracker and the other as a science combiner to enable high spectral resolution interferometry. Higher visibility fringes are selected depending on their baseline length and wavelengths for robust fringe tracking for over-resolved objects in the combined mode. We installed four accelerometers to study vibrations on the beam combiner table to improve fringe tracking. We here report the instrument concepts and the first on-sky science results.
The Center for High Angular Resolution Astronomy (CHARA) Array is a six-element interferometer with baselines ranging from 34 to 331 m. Three new beam combiners are entering operation: MYSTIC is a 6-telescope combiner for K-band; SPICA is a 6-telescope combiner for the visible R-band; and SILMARIL is a 3-telescope combiner for high sensitivity in H and K-bands. A seventh, portable telescope will use fiber optics for beam transport and will increase the baselines to 1 km. Observing time is available through a program funded by NSF. The programs are solicited and peer-reviewed by NSF’s National Optical-Infrared Astronomy Research Laboratory. The open community access has significantly expanded the range of astronomical investigations of stars and their environments. Here we summarize the scientific work and the on-going technical advances of the CHARA Array.
Optical interferometry is a powerful technique to achieve high angular resolution. However, its main issue is its lack of sensitivity, compared to other observation techniques. Efforts have been made in the previous decade to improve the sensitivity of optical interferometry, with instruments such as PIONIER and GRAVITY at VLTI, or MIRC-X and MYSTIC at CHARA. While those instruments pushed on sensitivity, their design focus was not the sensitivity but relative astrometric accuracy, imaging capability, or spectral resolution. Our goal is to build an instrument specifically designed to optimize for sensitivity. This meant focusing our design efforts on different parts of the instrument and investigating new technologies and techniques. First, we make use of the low noise C-RED One camera using e-APD technology and provided by First Light Imaging, already used in the improvement of sensitivity in recent new instruments. We forego the use of single-mode fibers but still favor an image plane design that offers more sensitivity than a pupil plane layout. We also use a minimum number of optical elements to maximize the throughput of the design, using a long focal length cylindrical mirror. We chose to limit our design to 3 beams, to have the capability to obtain closure phases, but not dilute the incoming flux in more beam combinations. We also use in our design an edge filter to have the capability to observe Hand K-band at the same time. We use a low spectral resolution, allowing for group delay fringe tracking but maximizing the SNR of the fringes for each spectral channel. All these elements will lead to a typical limiting magnitude between 10 and 11 in both H- and K-bands.
The Michigan Young STar Imager at CHARA (MYSTIC) is a K-band interferometric beam combining instrument funded by the United States National Science Foundation, designed primarily for imaging sub-au scale disk structures around nearby young stars and to probe the planet formation process. Installed at the CHARA array in July 2021, with baselines up to 331 meters, MYSTIC provides a maximum angular resolution of λ/2B ∼ 0.7 mas. The instrument injects phase corrected light from the array into inexpensive, single-mode, polarization maintaining silica fibers, which are then passed via a vacuum feedthrough into a cryogenic dewar operating at 220 K for imaging. MYSTIC utilizes a high frame rate, ultra-low read noise SAPHIRA detector, and implements two beam combiners: a 6-telescope image plane beam combiner, based on the MIRC-X design, for targets as faint as 7.7 Kmag, as well as a 4-telescope integrated optic beam-combiner mode using a spare chip leftover from the GRAVITY instrument. MYSTIC is co-phased with the MIRC-X (J+H band) instrument for simultaneous fringe-tracking and imaging, and shares its software suite with the latter to allow a single observer to operate both instruments. Herein, we present the instrument design, review its operational performance, present early commissioning science observations, and propose upgrades to the instrument that could improve its K-band sensitivity to 10th magnitude in the near future.
In this thesis work, we exploit the unique capabilities of long baseline interferometry to fill two gaps in exoplanet parameter space: 1) the discovery of new planets around stars more massive than the Sun (Project ARMADA), and 2) the characterization of known planets that are extremely close to their host star (Project PRIME). Current detection methods struggle to find exoplanets around hot (A/B-type) stars. We are pushing the astrometric limits of ground-based optical interferometers to carry out a survey of sub-arcsecond A/B-type binary systems with ARMADA. We are achieving astrometric precision at the few tens of micro-arcsecond level in short observations at CHARA/MIRC-X and VLTI/GRAVITY. This incredible precision allows us to probe the au-regime for giant planets orbiting individual stars of the binary system. We present the status of our survey, including our newly implemented etalon wavelength calibration method at CHARA, detection of new stellar mass companions, and non-detection limits down to a few Jupiter masses in some cases. With Project PRIME, we show that ground-based optical interferometry can be used to measure the orbit-dependent spectra of close-in “hot Jupiter”-type exoplanets with precision closure phases. Detecting the infrared spectra of such planets allows us to place useful constraints on atmosphere circulation models. We perform injection tests with MIRC-X and MYSTIC at CHARA for the hot Jupiter exoplanet Ups And b to show that we are reaching down to a contrast of 2e-4. The promise of both these methods demonstrate that optical interferometers are a valuable tool for probing unique regimes of exoplanet science.
The space missions TESS and PLATO plan to double the number of 4000 exoplanets already discovered and will measure the size of thousands of exoplanets around the brightest stars in the sky, allowing ground-based radial velocity spectroscopy follow-up to determine the orbit and mass of the detected planets. The new facility we are developing, MARVEL (Raskin et al. this conference1 ), will enable the ground-based follow-up of large numbers of exoplanet detections expected from TESS and PLATO, which cannot be carried out only by the current facilities that achieve the necessary radial velocity accuracy of 1 ms-1 or less. This paper presents the MARVEL observation strategy and performance analysis based on predicted PLATO transit detection yield simulations. The resulting observation scenario baseline will help in the instrument design choices and demonstrate the effectiveness of MARVEL as a TESS and PLATO science enabling facility.
In this contribution we report on our work to increase the spectral range of the Michigan Infrared Combiner- eXeter (MIRC-X) instrument at the CHARA array to allow for dual H and J band interferometric observations. We comment on the key science drivers behind this project and the methods of characterisation and correction of instrumental birefringence and dispersion. In addition, we report on the first results from on-sky commissioning in November 2019.
MIRC-X is a six telescope beam combiner at the CHARA array that works in J and H wavelength bands and provides an angular resolution equivalent to a B=331m diameter telescope. The legacy MIRC combiner has delivered outstanding results in the fields of stellar astrophysics and binaries. However, we required higher sensitivity to make ambitious scientific measurements of faint targets such as young stellar objects, binary systems with exoplanets, and active galactic nuclei. For that purpose, MIRC-X is built and is offered to the community since mid-2017. MIRC-X has demonstrated up to two magnitudes of improved faint magnitude sensitivity with the best-case H <= 8. Here we present a review of the instrument and present early science results, and highlight some of our ongoing science programs.
Since the first discovery of a planet outside of our Solar System in 1995, exoplanet research has shifted from detecting to characterizing worlds around other stars. The TESS (NASA, launched 2019) and PLATO mission (ESA, planned launch 2026) will find and constrain the size of thousands of exoplanets around bright stars all over the sky. Radial velocity measurements are needed to characterize the orbit and mass, and complete the picture of densities and composition of the exoplanet systems found. The Ariel mission (ESA, planned launch 2028) will characterize exoplanet atmospheres with infrared spectroscopy. Characterization of stellar activity using optical spectroscopy from the ground is key to retrieve the spectral footprint of the planetary atmosphere in Ariel’s spectra. To enable the scientific harvest of the TESS, PLATO and Ariel space missions, we plan to install MARVEL as an extension of the existing Mercator Telescope at the Roque De Los Muchachos Observatory on La Palma (SPAIN). MARVEL consists of an array of four 80 cm telescopes linked through optical fibers to a single high-resolution echelle spectrograph, optimized for extreme-precision radial velocity measurements. It can observe the radial velocities of four different stars simultaneously or, alternatively, combine the flux from four telescopes pointing to a single faint target in one spectrum. MARVEL is constructed by a KU Leuven (Belgium) led collaboration, with contributions from the UK, Austria, Australia, Sweden, Denmark and Spain. In this paper, we present the MARVEL instrument with special focus on the optical design and expected performance of the spectrograph, and report on the status of the project.
KEYWORDS: Stellar interferometry, Near infrared, Cameras, Data modeling, Signal to noise ratio, Sensors, Calibration, Nondestructive evaluation, Astronomy
We characterize a near-infrared C-RED ONE camera from First Light Imaging (FLI). This camera uses a SAPHIRA electron avalanche photo-diode array (e-APD) from Leonardo (previously Selex). To do so, we developed a model of the signal distribution. This model allows a measurement of the gain and the Excess Noise Factor (ENF) independently of preexisting calibration such as the system gain. The results of this study show a gain which is 0.53 ± 0.04 times the gain reported by the manufacturer. The measured ENF is 1.47 ± 0.03 when we expected 1.25. For an avalanche gain of ' 60 and a frame rate larger than 100 Hz, the total noise can be lower than 1 e-/frame/pixel. The lowest dark current level is 90e-/s/pixel, in agreement with the expected H-band background passing through the camera window. These performance values provide a significant improvement compared to earlier-generation PICNIC camera and allowed us to improve the performance of the Michigan infrared combiner (MIRC) instrument at the Center for High Angular Resolution Astronomy (CHARA), as part of our MIRC-X instrumentation project.
MIRC-X is a new beam combination instrument at the CHARA array that enables 6-telescope interferometric imaging on object classes that until now have been out of reach for milliarcsecond-resolution imaging. As part of an instrumentation effort lead by the University of Exeter and University of Michigan, we equipped the MIRC instrument with an ultra-low read-noise detector system and extended the wavelength range to the J and H- band. The first phase of the MIRC-X commissioning was successfully completed in June 2017. In 2018 we will commission polarisation control to improve the visibility calibration and implement a 'cross-talk resiliant' mode that will minimise visibility cross-talk and enable exoplanet searches using precision closure phases. Here we outline our key science drivers and give an overview about our commissioning timeline. We comment on operational aspects, such as remote observing, and the prospects of co-phased parallel operations with the upcoming MYSTIC combiner.
We present the design for MYSTIC, the Michigan Young STar Imager at CHARA. MYSTIC will be a K-band, cryogenic, 6-beam combiner for the Georgia State University CHARA telescope array. The design follows the image-plane combination scheme of the MIRC instrument where single-mode fibers bring starlight into a nonredundant fringe pattern to feed a spectrograph. Beams will be injected in polarization-maintaining fibers outside the cryogenic dewar and then be transported through a vacuum feedthrough into the 220K cold volume where combination is achieved and the light is dispersed. We will use a C-RED One camera (First Light Imaging) based on the eAPD SAPHIRA detector to allow for near-photon-counting performance. We also intend to support a 4-telescope mode using a leftover integrated optics component designed for the VLTI-GRAVITY experiment, allowing better sensitivity for the faintest targets. Our primary science driver motivation is to image disks around young stars in order to better understand planet formation and how forming planets might in influence disk structures.
MIRC-X is an upgrade of the six-telescope infrared beam combiner at the CHARA telescope array, the world's largest baseline interferometer in the optical/infrared, located at the Mount Wilson Observatory in Los Angeles. The upgraded instrument features an ultra-low noise and fast frame rate infrared camera (SAPHIRA detector) based on e-APD technology. We report the MIRC-X sensitivity upgrade work and first light results in detail focusing on the detector characteristics and software architecture.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.