In this work, a new organic light-emitting device (OLED) structure is proposed that allows light-emission from a metal-free device region, thus reducing the hurdles towards an electrically pumped organic solid state laser (OSL). Our design concept employs a stepwise change from a highly conductive but opaque metal part to a highly transparent but less conductive intrinsic emission layer. Here, the high current densities are localized to an area of a few micrometer in square, which is in the range of the mode volume of the transverse mode of an organic vertical-cavity surface-emitting laser (VCSEL). Besides these experimental results, we present findings from simulations which further support the feasibility of our design concept. Using an equivalent circuit approach, representing the current flow in the device, we calculate the time-dependent length of the emission zone and give estimations for appropriate material parameters.
Tunable, optical microcavities (MC) gain more and more importance for display, laser or other optical applications. The setup of dielectric elastomer actuators (DEA) enables a simple integration of an optical cavity, since reflective electrodes can confine a cavity that is filled with a transparent elastomer. Applying a voltage to the electrodes leads to squeezing of the elastomer and, due to the cavity thickness decrease, the resonator modes of interfering light changes. In this work we present an electrically tunable, optical MC based on ultra-soft poly(dimethylsiloxane) (PDMS). The PDMS gel is coated on a glass substrate with a distributed Bragg reflector, an ITO bottom electrode and a flexible, highly reflective metal electrode and mirror on top. The usage of an ultra-soft PDMS gel, with a storage modulus of about 1kPa, allows to decrease the operating voltage down to a few hundred or even several ten volts. The critical step of fabrication is the metallization of the PDMS gel layer that requires a previous oxidizing surface activation to gain reflective and conductive silver based layers on top. Therefore, the effects of oxygen plasma and UV/ozone treatment on PDMS and the created metal layer were investigated intensively. The performance of the electrically tunable, optical MC is tremendously dependent from an adequate surface activation and structuring of the top electrodes considering the mirror displacement and activation voltage. Here we could show that tunable MCs based on oxygen plasma activated PDMS show a homogenous and high thickness decrease up to 70% at 200V.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.