A low-loss 1 × 256 optical power splitter is designed and fabricated using silica-based planar lightwave circuit technology on a 6-in. quartz substrate. The measured results show that the insertion loss, uniformity, and wavelength-dependence loss (WDL) of a 1 × 256 splitter are <26.2, 1.97, and 1.83 dB, respectively, in the wavelength range from 1.26 to 1.63 μm. The insertion loss, uniformity, and WDL of a 1 × 256 splitter are <25.62, 1.33, and 1.03 dB, respectively, in the normal communication wavelength range from 1.31 to 1.55μm. The polarization dependence loss is <0.16 dB in the wavelengths of 1.31 and 1.55 μm.
We demonstrate a novel approach to characterize the microresonators using optical frequency domain reflectometry (OFDR). We analyzed the microresonators in both the spatial and spectral domains by a modified OFDR, which can reach a sensitivity of -130dB. We also provide a model to extract the free spectral range (FSR) of a microresonator from the backscattered signal. We fabricated three silica microresonators with different coupling conditions. The transmission differences between these samples can be shown clearly in the distributed loss curves. The power attenuation factor and the relative coupling strength of the microresonator can be derived from the OFDR data.
A receiver optical subassembly (ROSA) based on hybrid integrated technology is designed and fabricated. It consists of an 8-channel arrayed waveguide grating (AWG) with 2% refractive index difference, two 4-channel positive intrinsic-negative photodetector arrays, and two 4-channel transimpedance amplifier arrays. A flat-top optical spectrum was observed because the output waveguides have a multimode structure, and the average 1-dB bandwidth of AWG channels is 2.8 nm. The insertion loss of all channels is between −1.8 and −2.9 dB, and the cross talk between adjacent channel is less than −20 dB. The ROSA shows a maximum responsivity of 0.4 A / W and 3-dB bandwidth of more than 22 GHz for four channels, which can meet the data transmission rate of 25 Gb / s. In the future, we will improve the fabrication process to achieve a transmission rate of 8 × 25 Gb / s.
Based on silica arrayed waveguide grating technology, a hybrid integrated transmitter optical subassembly was developed. Four direct-modulating distributed feedback lasers and four focusing microlenses were integrated to a coarse wavelength-division multiplexer (CWDM) on a CuW substrate. The four-channel silica-on-silicon CWDM was fabricated with 1.5% refractive index difference and 20-nm wavelength spacing. The experimental results showed that the output optical power was >3 mW with 45 mA of injection current, the slope efficiency was >0.0833 W/A, and the 3-dB bandwidth was broader than 18.15 GHz. The 1-dB compress points were higher than 18 and 15.8 dBm for frequency of 10 and 18 GHz, respectively.
Access to the requested content is limited to institutions that have purchased or subscribe to SPIE eBooks.
You are receiving this notice because your organization may not have SPIE eBooks access.*
*Shibboleth/Open Athens users─please
sign in
to access your institution's subscriptions.
To obtain this item, you may purchase the complete book in print or electronic format on
SPIE.org.
INSTITUTIONAL Select your institution to access the SPIE Digital Library.
PERSONAL Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.