Programmed defects study on masks for 45nm immersion lithography using the novel AIMS 45-193i

Thomas Scherübl; Arndt C. Dürr; Klaus Böhm; Robert Birkner; Rigo Richter; Ulrich Strößner

doi:10.1117/12.736530

3 May 2007 Programmed defects study on masks for 45nm immersion lithography using the novel AIMS 45-193i

Thomas Scherübl, Arndt C. Dürr, Klaus Böhm, Robert Birkner, Rigo Richter, Ulrich Strößner

Proceedings Volume 6533, 23rd European Mask and Lithography Conference; 653309 (2007) https://doi.org/10.1117/12.736530
Event: European Mask and Lithography Conference2007, 2007, Grenoble, France

Abstract

Mask manufacturing for the 45nm node for hyper NA lithography requires tight defect and printability control at small features sizes. The AIMS^TM¹ technology is a well established methodology to analyze printability of mask defects, repairs and critical features by scanner emulation. With the step towards hyper NA imaging by immersion lithography the AIMS^TM technology has been faced with new challenges like vector effects, polarized illumination and tighter specs for repeatability and tool stability. These requirements pushed the development of an entirely new AIMS^TMgeneration. The AIMS^TM 45-193i has been designed and developed by Carl Zeiss to address these challenges. A new mechanical platform with a thermal and environmental control unit enables high tool stability. Thus a new class of specification becomes available. The 193nm optical beam path together with an improved beam homogenizer is dedicated to emulate scanners up to 1.4 NA. New features like polarized illumination and vector effect emulation make the AIMS^TM 45- 193i a powerful tool for defect disposition and scanner emulation for 45nm immersion lithography. In this paper results from one of the first production tools will be presented. Aerial images from phase shifting and binary masks with different immersion relevant settings will be discussed. Also, data from a long term repeatability study performed on masks with programmed defects will be shown. This study demonstrates the tool's ability to perform defect disposition with high repeatability. It is found that the tool will fulfill the 45nm node requirements to perform mask qualification for production use.

Citation Download Citation

Thomas Scherübl, Arndt C. Dürr, Klaus Böhm, Robert Birkner, Rigo Richter, and Ulrich Strößner "Programmed defects study on masks for 45nm immersion lithography using the novel AIMS 45-193i", Proc. SPIE 6533, 23rd European Mask and Lithography Conference, 653309 (3 May 2007); https://doi.org/10.1117/12.736530

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available