1 July 1992 Higher sensitivity moire interferometry for micromechanics studies
Author Affiliations +
Abstract
A whole-field in-plane displacement measurement method was developed for micromechanics studies. The method increased the sensitivity of conventional moiré interferometry by an order of magnitude. The increased sensitivity was achieved by a two-step process. Microscopic moiré interferometry, used for step 1 to map an original displacement field, provided a basic sensitivity of 4.8 fringes/μm displacement, which exceeds the previously conceived theoretical limit. Optical/digital fringe multiplication method (ODFMM) was implemented for step 2 to achieve further enhancement of sensitivity. The ODFMM consists of optical fringe shifting and a digital process to sharpen and combine the shifted fringes. The result is a map with p times as many fringe contours as the original map of step 1. A factor of β = 12 was achieved, providing a sensitivity of 57.6 fringes/μm displacement, which corresponds to that of moiré with 57,600 lines per mm (1,463,000 lines per in.). The optical, mechanical, and electronic systems implemented here are remarkably robust and quick. The method is demonstrated by three practical applications: fiber/matrix deformation of a metal/matrix composite, interface strains in a thick 0/90-deg graphite/epoxy composite, and thermal deformation around a solder joint in a microelectronic subassembly.
Bongtae Han "Higher sensitivity moire interferometry for micromechanics studies," Optical Engineering 31(7), (1 July 1992). https://doi.org/10.1117/12.57681
Published: 1 July 1992
Lens.org Logo
CITATIONS
Cited by 56 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Moire patterns

Deflectometry

Composites

Interferometers

Interfaces

Calibration

Actuators

Back to Top